Nombre del producto
Fail Safe Electric Actuator with Replaceable Supercapacitor Backup
Resumen del producto
Fail Safe Electric Actuator That Closes the Valve on Supercapacitor Power.
On/off electric actuator for quarter-turn ball valves. ISO 5211 mounting, for valves from 3/8″ to 2″. AC 110V/220V single phase on the same unit. On power loss, the built-in supercapacitor drives the valve to the fully closed position, with no air supply, no spring and no plant UPS. Dry-contact open/closed feedback through an aviation plug with a dust and water cap, wired without opening the cover. Position window on top. The supercapacitor is replaceable and sold as a spare part. Operating range -30 °C to 50 °C.
Fabricante desde 1999
Resumen del producto
The YZ-25-CAP is a fail safe electric actuator for on/off duty on quarter-turn ball valves. It runs on single-phase AC 110V or 220V, and the same unit accepts both. When the supply is lost, the built-in supercapacitor drives the valve to the fully closed position. No air supply, no spring pack, no plant UPS.
Buyers look for this kind of unit under several names: fail safe electric valve actuator, electric fail safe actuator, or electronic fail safe actuator, the last one because the stored energy is electrical and not a spring. The job is the same in each case. The valve must not stay open when the power goes.
Open and closed feedback is a dry contact, wired through an aviation plug on the side of the housing, so a technician connects it without removing the cover. A chained cap protects the connector from dust and water. A window on top of the actuator shows the valve position.
¿Qué ocurre cuando se va la luz?
The valve closes. The supercapacitor inside the actuator holds the energy for the closing stroke, so the shut-off does not depend on anything outside the actuator.
People who search for a spring return electric actuator usually want exactly this behaviour: a valve that closes by itself without power. Here a capacitor does the work, not a spring.
The supercapacitor is a service part. It is sold on its own and can be replaced on site during maintenance, so the actuator stays in service. The operating range is -30 °C to 50 °C.
Supercapacitor or Lithium Battery: Two Versions
YZNGTRONG builds this actuator in two versions. Both close the valve on power loss. Choose by power supply, site temperature and valve size.
| Artículo | YZ-25-CAP (this page) | YZ-25-AC / YZ-25-DC |
|---|---|---|
| Backup energy | Supercapacitor, replaceable | Batería de litio integrada |
| Consumo de energía | AC 110V / 220V, single phase | AC 110V / 220V / 380V single phase, or DC 24V / 48V |
| Temperatura de funcionamiento | -30 °C – 50 °C | 0 °C – 45 °C |
| Comportamiento ante una pérdida de alimentación | Valve driven to fully closed | Valve driven to fully closed |
| Tamaños de válvulas | 3/8″ – 2″ | 3/8″ – 1-1/4″ |
Valve Sizes and Torque
This actuator comes in two models. The YZ-25-CAP covers ball valves from 3/8″ to 1-1/4″. The YZ-50-CAP covers 1-1/2″ and 2″. The figures below are the breakaway torque of our V-2AM and V-3AM ball valves (1000 WOG, PTFE seats, 316), the valves each actuator is matched to.
| Tamaño de la válvula | Valve breakaway torque | Actuator model |
|---|---|---|
| 3/8″ | 3.0 N·m | YZ-25-CAP |
| 1/2″ | 4.5 N·m | YZ-25-CAP |
| 3/4″ | 8.5 N·m | YZ-25-CAP |
| 1″ | 11.0 N·m | YZ-25-CAP |
| 1-1/4″ | 15.0 N·m | YZ-25-CAP |
| 1-1/2″ | 21.0 N·m | YZ-50-CAP |
| 2″ | 25.0 N·m | YZ-50-CAP |
Especificaciones técnicas clave
| Artículo | Especificaciones |
|---|---|
| Modelo | YZ-25-CAP (3/8″ – 1-1/4″ valves), YZ-50-CAP (1-1/2″ and 2″ valves) |
| Montaje | ISO 5211 mounting pad |
| Valve size range | 3/8″ – 2″, across the two models |
| Consumo de energía | AC 110V / 220V, single phase. One unit accepts both voltages |
| Comportamiento ante una pérdida de alimentación | The built-in supercapacitor drives the valve to the fully closed position |
| Backup energy | Supercapacitor, replaceable and sold as a spare part |
| Tipo de control | On/Off (open–close), PLC controlled |
| Salida de señal | Dry contact, open / closed feedback, DC 24V / 48V |
| Feedback wiring | Aviation plug connector with dust and water cap. Connect or disconnect without removing the cover |
| Indicación de posición | Window on top of the actuator |
| Temperatura de funcionamiento | -30 °C – 50 °C |
Aplicaciones
- Tratamiento de aguas residuales y de alcantarillado: dosing and drain lines that have to shut when the power goes. A valve left open through an outage means overflow. See our aplicaciones en el tratamiento del agua.
- Líneas de producción industrial: on/off duty where there is no compressed air on site, the usual reason to choose electric over accionamiento neumático. See our aplicaciones industriales.
- Tuberías para instalaciones electrónicas y de alta tecnología: cooling water and general utility lines where a valve has to return to closed after a power dip. See our aplicaciones de válvulas semiconductoras.
- Líneas de procesamiento de alimentos y bebidas: Ciclos programados de apertura y cierre controlados por un PLC. Consulte nuestro aplicaciones en el sector de la alimentación y las bebidas.
- Fabricantes de maquinaria OEM: an on off valve actuator designed into a skid or panel, with the capacitor available later as a spare part.
Conexión del actuador a una válvula
Este producto es el solo actuador. It is a quarter turn electric actuator with an ISO 5211 mounting interface, available for ball valves from 3/8″ to 2″, for example our válvula de bola de acero inoxidable de dos piezas o válvula de bola de tres piezas. Tell us the valve size and end connection and we will quote the actuator and valve as one assembly.
Mounted on a ball valve, the assembly behaves like what some buyers call a normally closed motorized ball valve: without power, the valve is closed.
Preguntas frecuentes
What does fail safe mean on an electric actuator?
It means the actuator moves the valve to a defined position by itself when power is lost. On the YZ-25-CAP that position is fully closed, and the energy for the stroke comes from a built-in supercapacitor.
Is this a spring return electric actuator?
No. There is no spring inside. A supercapacitor stores the energy and closes the valve when the supply is lost, which gives the same result a spring return electric actuator is bought for.
What voltage does this fail safe actuator need?
Single-phase AC 110V or 220V. The same unit accepts both, so whether you are looking for a 110V valve actuator or a 220V valve actuator, it is one model: YZ-25-CAP.
Can the supercapacitor be replaced?
Yes. The supercapacitor is sold separately as a spare part and can be replaced on site during maintenance.
Is it an on/off or a modulating actuator?
On/off. It opens and closes the valve under PLC control and reports open and closed positions through a dry contact.
How is the position feedback wired?
Through an aviation plug on the side of the housing, rated for DC 24V or 48V on the dry contacts. The plug is reached without removing the cover, and a chained cap protects the connector from dust and water.
How can I see whether the valve is open or closed?
A window on top of the actuator shows the position. For the control panel, use the dry-contact open and closed signals.
¿Qué par de giro genera el actuador?
Each actuator is matched to the breakaway torque of the ball valve it drives. The YZ-25-CAP covers 3/8″ to 1-1/4″ valves, 3 to 15 N·m. The YZ-50-CAP covers 1-1/2″ and 2″ valves, 21 and 25 N·m.
What is the operating temperature range?
-30 °C to 50 °C.
¿Se trata de una válvula de bola eléctrica completa o solo del actuador?
The actuator only. YZNGTRONG is the electric actuator manufacturer and also makes the ball valves, so we can supply the fail safe valve actuator mounted on a valve as one assembly. Tell us the valve size and end connection when you request a quote.
Política de muestras
Estamos encantados de proporcionar muestras de productos para que los clientes evalúen la calidad o realicen pruebas. El proceso suele comenzar con un presupuesto basado en las especificaciones del cliente.
Si el precio es aceptable, podemos ofrecer muestras gratuitas o con coste, en función del tipo de producto y la disponibilidad.
Los gastos de envío corren a cargo del cliente.
Proceso de pedido
Tras confirmar los requisitos del producto y otros detalles con el cliente, emitiremos una Confirmación de Venta para su aprobación. Una vez confirmada, el cliente deberá abonar un depósito 30% para proceder a la producción.
Una vez finalizada la producción en serie y superada la inspección de la mercancía, el cliente deberá abonar el saldo restante 70% antes de que se organice el envío.
Productos relacionados
-
Electric Actuators for Ball Valves
Actuador eléctrico para válvulas con batería de reserva
Preguntas frecuentes
A. ¿Cómo puedo solicitar un presupuesto?
Proporcione una hoja de solicitud detallada que incluya las especificaciones del producto, los materiales, las cantidades y cualquier requisito especial. Le ofreceremos un presupuesto basado en su solicitud.
B. ¿Cuáles son sus condiciones de cotización?
Nuestros presupuestos se basan normalmente en Condiciones FOB. Sin embargo, también podemos ofrecer CFR, CIFu otros Incoterms a petición.
C. ¿Cuál es su cantidad mínima de pedido (MOQ)?
MOQ depends on the product. We operate on a made-to-order basis, and trial orders are welcome. For smaller orders, freight is arranged and borne by the buyer.
D. ¿Cuáles son sus condiciones de pago?
Por T/T - 30% anticipo a la confirmación del pedido, y 70% saldo antes del envío.
E. ¿Cuál es su plazo de entrega?
El plazo de entrega depende de la cantidad del pedido y de las especificaciones. Le confirmaremos el calendario exacto cuando usted Solicita un presupuesto.
¿Quiere saber más?
Si está interesado en alguno de nuestros productos o servicios, sólo tiene que rellenar el siguiente formulario. Nuestro equipo se pondrá en contacto con usted lo antes posible para facilitarle la información que necesite.

