Produktname
Fail Safe Electric Actuator with Replaceable Supercapacitor Backup
Produktübersicht
Fail Safe Electric Actuator That Closes the Valve on Supercapacitor Power.
On/off electric actuator for quarter-turn ball valves. ISO 5211 mounting, for valves from 3/8″ to 2″. AC 110V/220V single phase on the same unit. On power loss, the built-in supercapacitor drives the valve to the fully closed position, with no air supply, no spring and no plant UPS. Dry-contact open/closed feedback through an aviation plug with a dust and water cap, wired without opening the cover. Position window on top. The supercapacitor is replaceable and sold as a spare part. Operating range -30 °C to 50 °C.
Manufacturer since 1999
Produktübersicht
The YZ-25-CAP is a fail safe electric actuator for on/off duty on quarter-turn ball valves. It runs on single-phase AC 110V or 220V, and the same unit accepts both. When the supply is lost, the built-in supercapacitor drives the valve to the fully closed position. No air supply, no spring pack, no plant UPS.
Buyers look for this kind of unit under several names: fail safe electric valve actuator, electric fail safe actuator, or electronic fail safe actuator, the last one because the stored energy is electrical and not a spring. The job is the same in each case. The valve must not stay open when the power goes.
Open and closed feedback is a dry contact, wired through an aviation plug on the side of the housing, so a technician connects it without removing the cover. A chained cap protects the connector from dust and water. A window on top of the actuator shows the valve position.
What Happens When the Power Fails
The valve closes. The supercapacitor inside the actuator holds the energy for the closing stroke, so the shut-off does not depend on anything outside the actuator.
People who search for a spring return electric actuator usually want exactly this behaviour: a valve that closes by itself without power. Here a capacitor does the work, not a spring.
The supercapacitor is a service part. It is sold on its own and can be replaced on site during maintenance, so the actuator stays in service. The operating range is -30 °C to 50 °C.
Supercapacitor or Lithium Battery: Two Versions
YZNGTRONG builds this actuator in two versions. Both close the valve on power loss. Choose by power supply, site temperature and valve size.
| Artikel | YZ-25-CAP (this page) | YZ-25-AC / YZ-25-DC |
|---|---|---|
| Backup energy | Supercapacitor, replaceable | Built-in lithium battery |
| Power input | AC 110V / 220V, single phase | AC 110V / 220V / 380V single phase, or DC 24V / 48V |
| Betriebstemperatur | -30 °C – 50 °C | 0 °C – 45 °C |
| Power-loss behaviour | Valve driven to fully closed | Valve driven to fully closed |
| Valve sizes | 3/8″ – 2″ | 3/8″ – 1-1/4″ |
Valve Sizes and Torque
This actuator comes in two models. The YZ-25-CAP covers ball valves from 3/8″ to 1-1/4″. The YZ-50-CAP covers 1-1/2″ and 2″. The figures below are the breakaway torque of our V-2AM and V-3AM ball valves (1000 WOG, PTFE seats, 316), the valves each actuator is matched to.
| Ventilgröße | Valve breakaway torque | Actuator model |
|---|---|---|
| 3/8″ | 3.0 N·m | YZ-25-CAP |
| 1/2″ | 4.5 N·m | YZ-25-CAP |
| 3/4″ | 8.5 N·m | YZ-25-CAP |
| 1″ | 11.0 N·m | YZ-25-CAP |
| 1-1/4″ | 15.0 N·m | YZ-25-CAP |
| 1-1/2″ | 21.0 N·m | YZ-50-CAP |
| 2″ | 25.0 N·m | YZ-50-CAP |
Wichtige technische Spezifikationen
| Artikel | Spezifikation |
|---|---|
| Modell | YZ-25-CAP (3/8″ – 1-1/4″ valves), YZ-50-CAP (1-1/2″ and 2″ valves) |
| Montage | ISO 5211 mounting pad |
| Valve size range | 3/8″ – 2″, across the two models |
| Power input | AC 110V / 220V, single phase. One unit accepts both voltages |
| Power-loss behaviour | The built-in supercapacitor drives the valve to the fully closed position |
| Backup energy | Supercapacitor, replaceable and sold as a spare part |
| Control type | On/Off (open–close), PLC controlled |
| Signal output | Dry contact, open / closed feedback, DC 24V / 48V |
| Feedback wiring | Aviation plug connector with dust and water cap. Connect or disconnect without removing the cover |
| Positionsanzeige | Window on top of the actuator |
| Betriebstemperatur | -30 °C – 50 °C |
Anwendungen
- Wastewater and sewage treatment: dosing and drain lines that have to shut when the power goes. A valve left open through an outage means overflow. See our water treatment applications.
- Industrial process lines: on/off duty where there is no compressed air on site, the usual reason to choose electric over pneumatic actuation. See our industrielle Anwendungen.
- Electronics and hi-tech facility piping: cooling water and general utility lines where a valve has to return to closed after a power dip. See our semiconductor valve applications.
- Food and beverage processing lines: scheduled open–close cycles under PLC control. See our food and beverage applications.
- OEM machine builders: an on off valve actuator designed into a skid or panel, with the capacitor available later as a spare part.
Pairing the Actuator with a Valve
This product is the actuator only. It is a quarter turn electric actuator with an ISO 5211 mounting interface, available for ball valves from 3/8″ to 2″, for example our two-piece stainless ball valve oder dreiteiliger Kugelhahn. Tell us the valve size and end connection and we will quote the actuator and valve as one assembly.
Mounted on a ball valve, the assembly behaves like what some buyers call a normally closed motorized ball valve: without power, the valve is closed.
Häufig gestellte Fragen
What does fail safe mean on an electric actuator?
It means the actuator moves the valve to a defined position by itself when power is lost. On the YZ-25-CAP that position is fully closed, and the energy for the stroke comes from a built-in supercapacitor.
Is this a spring return electric actuator?
No. There is no spring inside. A supercapacitor stores the energy and closes the valve when the supply is lost, which gives the same result a spring return electric actuator is bought for.
What voltage does this fail safe actuator need?
Single-phase AC 110V or 220V. The same unit accepts both, so whether you are looking for a 110V valve actuator or a 220V valve actuator, it is one model: YZ-25-CAP.
Can the supercapacitor be replaced?
Yes. The supercapacitor is sold separately as a spare part and can be replaced on site during maintenance.
Is it an on/off or a modulating actuator?
On/off. It opens and closes the valve under PLC control and reports open and closed positions through a dry contact.
How is the position feedback wired?
Through an aviation plug on the side of the housing, rated for DC 24V or 48V on the dry contacts. The plug is reached without removing the cover, and a chained cap protects the connector from dust and water.
How can I see whether the valve is open or closed?
A window on top of the actuator shows the position. For the control panel, use the dry-contact open and closed signals.
What torque does the actuator deliver?
Each actuator is matched to the breakaway torque of the ball valve it drives. The YZ-25-CAP covers 3/8″ to 1-1/4″ valves, 3 to 15 N·m. The YZ-50-CAP covers 1-1/2″ and 2″ valves, 21 and 25 N·m.
Wie groß ist der Betriebstemperaturbereich?
-30 °C to 50 °C.
Is this a complete electric ball valve, or just the actuator?
The actuator only. YZNGTRONG is the electric actuator manufacturer and also makes the ball valves, so we can supply the fail safe valve actuator mounted on a valve as one assembly. Tell us the valve size and end connection when you request a quote.
Musterpolitik
Wir stellen unseren Kunden gerne Produktmuster zur Verfügung, um die Qualität zu bewerten oder Tests durchzuführen. Der Prozess beginnt in der Regel mit einem Angebot auf der Grundlage der Spezifikationen des Kunden.
Wenn der Preis akzeptabel ist, können wir je nach Produkttyp und Verfügbarkeit kostenlose oder kostenpflichtige Muster anbieten.
Die Versandgebühren gehen zu Lasten des Kunden.
Bestellvorgang
Nachdem wir die Produktanforderungen und andere Details mit dem Kunden abgestimmt haben, stellen wir eine Verkaufsbestätigung zur Genehmigung aus. Nach der Bestätigung muss der Kunde eine 30%-Anzahlung leisten, um mit der Produktion fortzufahren.
Wenn die Massenproduktion abgeschlossen ist und die Waren die Inspektion bestehen, muss der Kunde den Restbetrag 70% bezahlen, bevor der Versand veranlasst wird.
Verwandte Produkte
-
Electric Actuators for Ball Valves
Elektrischer Ventilantrieb mit Notstromversorgung
Häufig gestellte Fragen
A. Wie kann ich ein Angebot anfordern?
Bitte fügen Sie ein detailliertes Anfrageformular mit Produktspezifikationen, Materialien, Mengen und besonderen Anforderungen bei. Wir werden Ihnen ein Angebot auf der Grundlage Ihrer Anfrage unterbreiten.
B. Wie lauten Ihre Angebotsbedingungen?
Unsere Kostenvoranschläge basieren in der Regel auf FOB-Bedingungen. Wir können aber auch anbieten CFR, CIFoder andere Incoterms auf Anfrage.
C. Wie hoch ist Ihre Mindestbestellmenge (MOQ)?
MOQ depends on the product. We operate on a made-to-order basis, and trial orders are welcome. For smaller orders, freight is arranged and borne by the buyer.
D. Wie lauten Ihre Zahlungsbedingungen?
per Überweisung - 30% Anzahlung bei Auftragsbestätigung, und 70% Restbetrag vor Versand.
E. Wie lange ist Ihre Vorlaufzeit?
Die Lieferzeit hängt von der Bestellmenge und den Spezifikationen ab. Wir werden Ihnen den genauen Zeitplan bestätigen, sobald Sie Ein Angebot anfordern.
Möchten Sie mehr erfahren?
Wenn Sie sich für eines unserer Produkte oder eine unserer Dienstleistungen interessieren, füllen Sie einfach das unten stehende Formular aus. Unser Team wird sich so schnell wie möglich mit Ihnen in Verbindung setzen und Ihnen die gewünschten Informationen zukommen lassen.

