Nome del prodotto
Fail Safe Electric Actuator with Replaceable Supercapacitor Backup
Riepilogo del prodotto
Fail Safe Electric Actuator That Closes the Valve on Supercapacitor Power.
On/off electric actuator for quarter-turn ball valves. ISO 5211 mounting, for valves from 3/8″ to 2″. AC 110V/220V single phase on the same unit. On power loss, the built-in supercapacitor drives the valve to the fully closed position, with no air supply, no spring and no plant UPS. Dry-contact open/closed feedback through an aviation plug with a dust and water cap, wired without opening the cover. Position window on top. The supercapacitor is replaceable and sold as a spare part. Operating range -30 °C to 50 °C.
Produttore dal 1999
Riepilogo del prodotto
The YZ-25-CAP is a fail safe electric actuator for on/off duty on quarter-turn ball valves. It runs on single-phase AC 110V or 220V, and the same unit accepts both. When the supply is lost, the built-in supercapacitor drives the valve to the fully closed position. No air supply, no spring pack, no plant UPS.
Buyers look for this kind of unit under several names: fail safe electric valve actuator, electric fail safe actuator, or electronic fail safe actuator, the last one because the stored energy is electrical and not a spring. The job is the same in each case. The valve must not stay open when the power goes.
Open and closed feedback is a dry contact, wired through an aviation plug on the side of the housing, so a technician connects it without removing the cover. A chained cap protects the connector from dust and water. A window on top of the actuator shows the valve position.
Cosa succede in caso di interruzione di corrente
The valve closes. The supercapacitor inside the actuator holds the energy for the closing stroke, so the shut-off does not depend on anything outside the actuator.
People who search for a spring return electric actuator usually want exactly this behaviour: a valve that closes by itself without power. Here a capacitor does the work, not a spring.
The supercapacitor is a service part. It is sold on its own and can be replaced on site during maintenance, so the actuator stays in service. The operating range is -30 °C to 50 °C.
Supercapacitor or Lithium Battery: Two Versions
YZNGTRONG builds this actuator in two versions. Both close the valve on power loss. Choose by power supply, site temperature and valve size.
| Articolo | YZ-25-CAP (this page) | YZ-25-AC / YZ-25-DC |
|---|---|---|
| Backup energy | Supercapacitor, replaceable | Batteria al litio integrata |
| Potenza assorbita | AC 110V / 220V, single phase | AC 110V / 220V / 380V single phase, or DC 24V / 48V |
| Temperatura di esercizio | -30 °C – 50 °C | 0 °C – 45 °C |
| Comportamento in caso di interruzione dell'alimentazione | Valve driven to fully closed | Valve driven to fully closed |
| Dimensioni delle valvole | 3/8″ – 2″ | 3/8″ – 1-1/4″ |
Valve Sizes and Torque
This actuator comes in two models. The YZ-25-CAP covers ball valves from 3/8″ to 1-1/4″. The YZ-50-CAP covers 1-1/2″ and 2″. The figures below are the breakaway torque of our V-2AM and V-3AM ball valves (1000 WOG, PTFE seats, 316), the valves each actuator is matched to.
| Dimensioni della valvola | Valve breakaway torque | Actuator model |
|---|---|---|
| 3/8″ | 3.0 N·m | YZ-25-CAP |
| 1/2″ | 4.5 N·m | YZ-25-CAP |
| 3/4″ | 8.5 N·m | YZ-25-CAP |
| 1″ | 11.0 N·m | YZ-25-CAP |
| 1-1/4″ | 15.0 N·m | YZ-25-CAP |
| 1-1/2″ | 21.0 N·m | YZ-50-CAP |
| 2″ | 25.0 N·m | YZ-50-CAP |
Specifiche tecniche principali
| Articolo | Specifiche tecniche |
|---|---|
| Modello | YZ-25-CAP (3/8″ – 1-1/4″ valves), YZ-50-CAP (1-1/2″ and 2″ valves) |
| Montaggio | ISO 5211 mounting pad |
| Valve size range | 3/8″ – 2″, across the two models |
| Potenza assorbita | AC 110V / 220V, single phase. One unit accepts both voltages |
| Comportamento in caso di interruzione dell'alimentazione | The built-in supercapacitor drives the valve to the fully closed position |
| Backup energy | Supercapacitor, replaceable and sold as a spare part |
| Tipo di controllo | On/Off (open–close), PLC controlled |
| Uscita del segnale | Dry contact, open / closed feedback, DC 24V / 48V |
| Feedback wiring | Aviation plug connector with dust and water cap. Connect or disconnect without removing the cover |
| Indicazione della posizione | Window on top of the actuator |
| Temperatura di esercizio | -30 °C – 50 °C |
Applicazioni
- Trattamento delle acque reflue e delle acque fognarie: dosing and drain lines that have to shut when the power goes. A valve left open through an outage means overflow. See our applicazioni nel settore del trattamento delle acque.
- Linee di produzione industriale: on/off duty where there is no compressed air on site, the usual reason to choose electric over azionamento pneumatico. See our applicazioni industriali.
- Impianti di tubazioni per il settore elettronico e dell'alta tecnologia: cooling water and general utility lines where a valve has to return to closed after a power dip. See our applicazioni delle valvole a semiconduttore.
- Linee di lavorazione di alimenti e bevande: cicli di apertura e chiusura programmati tramite PLC. Consulta il nostro applicazioni nel settore alimentare e delle bevande.
- Costruttori di macchinari OEM: an on off valve actuator designed into a skid or panel, with the capacitor available later as a spare part.
Abbinamento dell'attuatore a una valvola
Questo prodotto è il solo attuatore. It is a quarter turn electric actuator with an ISO 5211 mounting interface, available for ball valves from 3/8″ to 2″, for example our valvola a sfera in acciaio inossidabile a due pezzi o valvola a sfera a tre pezzi. Tell us the valve size and end connection and we will quote the actuator and valve as one assembly.
Mounted on a ball valve, the assembly behaves like what some buyers call a normally closed motorized ball valve: without power, the valve is closed.
Domande frequenti
What does fail safe mean on an electric actuator?
It means the actuator moves the valve to a defined position by itself when power is lost. On the YZ-25-CAP that position is fully closed, and the energy for the stroke comes from a built-in supercapacitor.
Is this a spring return electric actuator?
No. There is no spring inside. A supercapacitor stores the energy and closes the valve when the supply is lost, which gives the same result a spring return electric actuator is bought for.
What voltage does this fail safe actuator need?
Single-phase AC 110V or 220V. The same unit accepts both, so whether you are looking for a 110V valve actuator or a 220V valve actuator, it is one model: YZ-25-CAP.
Can the supercapacitor be replaced?
Yes. The supercapacitor is sold separately as a spare part and can be replaced on site during maintenance.
Is it an on/off or a modulating actuator?
On/off. It opens and closes the valve under PLC control and reports open and closed positions through a dry contact.
How is the position feedback wired?
Through an aviation plug on the side of the housing, rated for DC 24V or 48V on the dry contacts. The plug is reached without removing the cover, and a chained cap protects the connector from dust and water.
How can I see whether the valve is open or closed?
A window on top of the actuator shows the position. For the control panel, use the dry-contact open and closed signals.
Qual è la coppia erogata dall'attuatore?
Each actuator is matched to the breakaway torque of the ball valve it drives. The YZ-25-CAP covers 3/8″ to 1-1/4″ valves, 3 to 15 N·m. The YZ-50-CAP covers 1-1/2″ and 2″ valves, 21 and 25 N·m.
What is the operating temperature range?
-30 °C to 50 °C.
Si tratta di una valvola a sfera completamente elettrica o solo dell'attuatore?
The actuator only. YZNGTRONG is the electric actuator manufacturer and also makes the ball valves, so we can supply the fail safe valve actuator mounted on a valve as one assembly. Tell us the valve size and end connection when you request a quote.
Politica di esempio
Siamo lieti di fornire ai clienti campioni di prodotto per valutare la qualità o effettuare test. Il processo inizia in genere con un preventivo basato sulle specifiche del cliente.
Se il prezzo è accettabile, possiamo offrire campioni gratuiti o a pagamento, a seconda del tipo di prodotto e della disponibilità.
Le spese di spedizione sono a carico del cliente.
Processo d'ordine
Dopo aver confermato i requisiti del prodotto e altri dettagli con il cliente, emetteremo una conferma di vendita per approvazione. Una volta confermata, il cliente è tenuto a versare un deposito 30% per procedere con la produzione.
Quando la produzione di massa è completata e la merce supera l'ispezione, il cliente deve pagare il saldo 70% prima di organizzare la spedizione.
Prodotti correlati
-
Electric Actuators for Ball Valves
Attuatore elettrico per valvole con alimentazione di riserva a batteria
Domande frequenti
A. Come posso richiedere un preventivo?
Si prega di fornire una scheda di richiesta dettagliata che includa le specifiche del prodotto, i materiali, le quantità ed eventuali requisiti speciali. Vi offriremo un'offerta basata sulla vostra richiesta.
B. Quali sono i termini di quotazione?
I nostri preventivi si basano in genere su Condizioni FOB. Tuttavia, possiamo anche offrire CFR, CIFo altri Incoterms su richiesta.
C. Qual è la vostra quantità minima d'ordine (MOQ)?
MOQ depends on the product. We operate on a made-to-order basis, and trial orders are welcome. For smaller orders, freight is arranged and borne by the buyer.
D. Quali sono i termini di pagamento?
Per T/T - 30% acconto sulla conferma d'ordine e 70% saldo prima della spedizione.
E. Qual è il vostro tempo di consegna?
I tempi di consegna dipendono dalla quantità ordinata e dalle specifiche. Vi confermeremo i tempi esatti quando Richiedi un preventivo.
Volete saperne di più?
Se siete interessati a uno dei nostri prodotti o servizi, compilate il modulo sottostante. Il nostro team si metterà in contatto con voi il prima possibile per fornirvi le informazioni di cui avete bisogno.

