Nom du produit
Fail Safe Electric Actuator with Replaceable Supercapacitor Backup
Résumé du produit
Fail Safe Electric Actuator That Closes the Valve on Supercapacitor Power.
On/off electric actuator for quarter-turn ball valves. ISO 5211 mounting, for valves from 3/8″ to 2″. AC 110V/220V single phase on the same unit. On power loss, the built-in supercapacitor drives the valve to the fully closed position, with no air supply, no spring and no plant UPS. Dry-contact open/closed feedback through an aviation plug with a dust and water cap, wired without opening the cover. Position window on top. The supercapacitor is replaceable and sold as a spare part. Operating range -30 °C to 50 °C.
Fabricant depuis 1999
Résumé du produit
The YZ-25-CAP is a fail safe electric actuator for on/off duty on quarter-turn ball valves. It runs on single-phase AC 110V or 220V, and the same unit accepts both. When the supply is lost, the built-in supercapacitor drives the valve to the fully closed position. No air supply, no spring pack, no plant UPS.
Buyers look for this kind of unit under several names: fail safe electric valve actuator, electric fail safe actuator, or electronic fail safe actuator, the last one because the stored energy is electrical and not a spring. The job is the same in each case. The valve must not stay open when the power goes.
Open and closed feedback is a dry contact, wired through an aviation plug on the side of the housing, so a technician connects it without removing the cover. A chained cap protects the connector from dust and water. A window on top of the actuator shows the valve position.
Que se passe-t-il en cas de coupure de courant ?
The valve closes. The supercapacitor inside the actuator holds the energy for the closing stroke, so the shut-off does not depend on anything outside the actuator.
People who search for a spring return electric actuator usually want exactly this behaviour: a valve that closes by itself without power. Here a capacitor does the work, not a spring.
The supercapacitor is a service part. It is sold on its own and can be replaced on site during maintenance, so the actuator stays in service. The operating range is -30 °C to 50 °C.
Supercapacitor or Lithium Battery: Two Versions
YZNGTRONG builds this actuator in two versions. Both close the valve on power loss. Choose by power supply, site temperature and valve size.
| Article | YZ-25-CAP (this page) | YZ-25-AC / YZ-25-DC |
|---|---|---|
| Backup energy | Supercapacitor, replaceable | Batterie au lithium intégrée |
| Puissance absorbée | AC 110V / 220V, single phase | AC 110V / 220V / 380V single phase, or DC 24V / 48V |
| Température de fonctionnement | -30 °C – 50 °C | 0 °C – 45 °C |
| Comportement en cas de coupure d'alimentation | Valve driven to fully closed | Valve driven to fully closed |
| Dimensions des vannes | 3/8″ – 2″ | 3/8″ – 1-1/4″ |
Valve Sizes and Torque
This actuator comes in two models. The YZ-25-CAP covers ball valves from 3/8″ to 1-1/4″. The YZ-50-CAP covers 1-1/2″ and 2″. The figures below are the breakaway torque of our V-2AM and V-3AM ball valves (1000 WOG, PTFE seats, 316), the valves each actuator is matched to.
| Valve size | Valve breakaway torque | Actuator model |
|---|---|---|
| 3/8″ | 3.0 N·m | YZ-25-CAP |
| 1/2″ | 4.5 N·m | YZ-25-CAP |
| 3/4″ | 8.5 N·m | YZ-25-CAP |
| 1″ | 11.0 N·m | YZ-25-CAP |
| 1-1/4″ | 15.0 N·m | YZ-25-CAP |
| 1-1/2″ | 21.0 N·m | YZ-50-CAP |
| 2″ | 25.0 N·m | YZ-50-CAP |
Caractéristiques techniques principales
| Article | Spécifications |
|---|---|
| Modèle | YZ-25-CAP (3/8″ – 1-1/4″ valves), YZ-50-CAP (1-1/2″ and 2″ valves) |
| Montage | ISO 5211 mounting pad |
| Valve size range | 3/8″ – 2″, across the two models |
| Puissance absorbée | AC 110V / 220V, single phase. One unit accepts both voltages |
| Comportement en cas de coupure d'alimentation | The built-in supercapacitor drives the valve to the fully closed position |
| Backup energy | Supercapacitor, replaceable and sold as a spare part |
| Type de commande | On/Off (open–close), PLC controlled |
| Sortie du signal | Dry contact, open / closed feedback, DC 24V / 48V |
| Feedback wiring | Aviation plug connector with dust and water cap. Connect or disconnect without removing the cover |
| Indication de position | Window on top of the actuator |
| Température de fonctionnement | -30 °C – 50 °C |
Applications
- Traitement des eaux usées et des eaux d'égout : dosing and drain lines that have to shut when the power goes. A valve left open through an outage means overflow. See our applications dans le domaine du traitement de l'eau.
- Lignes de production industrielles : on/off duty where there is no compressed air on site, the usual reason to choose electric over actionnement pneumatique. See our applications industrielles.
- Tuyauterie des installations électroniques et de haute technologie : cooling water and general utility lines where a valve has to return to closed after a power dip. See our applications des valves à semi-conducteurs.
- Lignes de transformation des produits alimentaires et des boissons : cycles d'ouverture et de fermeture programmés, commandés par un automate programmable (PLC). Consultez notre applications dans le secteur agroalimentaire.
- Fabricants de machines en OEM : an on off valve actuator designed into a skid or panel, with the capacitor available later as a spare part.
Associer l'actionneur à une vanne
Ce produit est le actionneur uniquement. It is a quarter turn electric actuator with an ISO 5211 mounting interface, available for ball valves from 3/8″ to 2″, for example our robinet à bille en acier inoxydable en deux parties ou robinet à boisseau sphérique en trois parties. Tell us the valve size and end connection and we will quote the actuator and valve as one assembly.
Mounted on a ball valve, the assembly behaves like what some buyers call a normally closed motorized ball valve: without power, the valve is closed.
FAQ
What does fail safe mean on an electric actuator?
It means the actuator moves the valve to a defined position by itself when power is lost. On the YZ-25-CAP that position is fully closed, and the energy for the stroke comes from a built-in supercapacitor.
Is this a spring return electric actuator?
No. There is no spring inside. A supercapacitor stores the energy and closes the valve when the supply is lost, which gives the same result a spring return electric actuator is bought for.
What voltage does this fail safe actuator need?
Single-phase AC 110V or 220V. The same unit accepts both, so whether you are looking for a 110V valve actuator or a 220V valve actuator, it is one model: YZ-25-CAP.
Can the supercapacitor be replaced?
Yes. The supercapacitor is sold separately as a spare part and can be replaced on site during maintenance.
Is it an on/off or a modulating actuator?
On/off. It opens and closes the valve under PLC control and reports open and closed positions through a dry contact.
How is the position feedback wired?
Through an aviation plug on the side of the housing, rated for DC 24V or 48V on the dry contacts. The plug is reached without removing the cover, and a chained cap protects the connector from dust and water.
How can I see whether the valve is open or closed?
A window on top of the actuator shows the position. For the control panel, use the dry-contact open and closed signals.
Quel couple l'actionneur fournit-il ?
Each actuator is matched to the breakaway torque of the ball valve it drives. The YZ-25-CAP covers 3/8″ to 1-1/4″ valves, 3 to 15 N·m. The YZ-50-CAP covers 1-1/2″ and 2″ valves, 21 and 25 N·m.
What is the operating temperature range?
-30 °C to 50 °C.
S'agit-il d'une vanne à bille électrique complète ou simplement de l'actionneur ?
The actuator only. YZNGTRONG is the electric actuator manufacturer and also makes the ball valves, so we can supply the fail safe valve actuator mounted on a valve as one assembly. Tell us the valve size and end connection when you request a quote.
Exemple de politique
Nous sommes heureux de fournir des échantillons de produits aux clients pour qu'ils puissent évaluer la qualité ou effectuer des tests. Le processus commence généralement par un devis basé sur les spécifications du client.
Si le prix est acceptable, nous pouvons proposer des échantillons gratuits ou payants en fonction du type de produit et de sa disponibilité.
Les frais d'expédition sont à la charge du client.
Processus de commande
Après avoir confirmé les exigences du produit et d'autres détails avec le client, nous émettons une confirmation de vente pour approbation. Une fois la confirmation obtenue, le client doit verser un acompte de 30% pour lancer la production.
Lorsque la production de masse est achevée et que les marchandises ont passé l'inspection, le client doit payer le solde 70% avant que l'expédition ne soit organisée.
Produits apparentés
-
Electric Actuators for Ball Valves
Actionneur électrique de vanne avec alimentation de secours par batterie
FAQ
A. Comment puis-je demander un devis ?
Veuillez fournir une demande détaillée comprenant les spécifications du produit, les matériaux, les quantités et toute exigence particulière. Nous vous proposerons un devis sur la base de votre demande.
B. Quelles sont les conditions de votre devis ?
Nos devis sont généralement basés sur Conditions FOB. Cependant, nous pouvons également offrir CFR, CIFou d'autres Incoterms sur demande.
C. Quelle est votre quantité minimale de commande (QMC) ?
MOQ depends on the product. We operate on a made-to-order basis, and trial orders are welcome. For smaller orders, freight is arranged and borne by the buyer.
D. Quelles sont vos conditions de paiement ?
Par T/T - 30% d'acompte à la confirmation de la commande, et 70% de solde avant l'expédition.
E. Quel est votre délai de livraison ?
Le délai de livraison dépend de la quantité commandée et des spécifications. Nous vous confirmerons le calendrier précis lorsque vous demander un devis.
Vous voulez en savoir plus ?
Si vous êtes intéressé par l'un de nos produits ou services, il vous suffit de remplir le formulaire ci-dessous. Notre équipe prendra contact avec vous dans les plus brefs délais pour vous fournir les informations dont vous avez besoin.

