Camlock Valve – Stainless Steel Ball Valve with Male Camlock Adapter, 1-1/2″ & 2″, 1000 WOG

The YZNG TRONG V-2CL is a stainless steel camlock valve: a two-piece, full-port ball valve with a male cam-and-groove adapter on one end and a threaded connection on the other. Instead of fitting a separate valve upstream and a plain camlock adapter at the hose, you get both in one body — the shut-off sits right at the hose coupling.

Two end configurations are made: female thread × male camlock adapter (Type A style) and male thread × male camlock adapter (Type F style), in 1-1/2″ and 2″. The body is rated 1000 WOG with a PTFE seat, in 304 or 316 stainless steel, and the male adapter snaps into any standard camlock coupler without tools.

Why a Camlock Ball Valve Instead of a Valve Plus an Adapter

• Werkzeuglose Verbindung: the cam arms lock the hose coupler in seconds — no wrenches, no thread sealing on the hose side.
• Absperrung am Schlauch: the coupling and the valve are one body, so the line is stopped and disconnected at the same point.
• One fewer joint: a valve with a built-in adapter replaces a valve, a nipple and a separate camlock adapter — one fewer threaded joint to seal and one fewer leak path.
• Zwei Fadenoptionen: female thread (Type A style) for pump and tank outlets, male thread (Type F style) for inline hose ends and pipe stubs.
• 304 oder 316: choose 316 where the medium carries chlorides — brine, seawater, many chemicals — because the molybdenum in 316 resists chloride pitting. For water and non-chloride duties, 304 does the job.

Wichtige technische Spezifikationen

Type A or Type F: Which Thread End

• Wähle es aus when a hose has to be connected and disconnected often, and you want the shut-off right at the connection instead of further up the line.
• Choose female thread × camlock (Type A style) for pump outlets, tank nozzles and drum or tote outlets.
• Choose male thread × camlock (Type F style) für Inline-Schlauchanschlüsse und Rohrstutzen.
• Wähle diese Option nicht aus for compressed air or steam service — cam-and-groove couplings are not used on compressed gas — or as a substitute for permanent piping. For welded process lines use a zweiteiliges geschweißtes Kugelventil; for threaded process piping see the Kugelhahn mit Außen- und Innengewinde.
• Check the whole assembly: the 1000 WOG rating is the valve body. The working pressure of the hose connection is set by the lowest-rated component — usually the coupler or the hose — so match those to your line.

Anwendungen

Stainless steel camlock valves go where a hose is coupled and uncoupled many times a day and the operator needs to close the line at the connection:

• Tank truck and tanker offloading: closing and disconnecting at the hose end after each delivery of fuel, chemicals, water or waste liquids.
• IBC tote fill and drain: a valve with a camlock outlet lets one tote connect to different hoses or trucks without re-threading, and the tote stays shut when the hose comes off.
• Chemical drum and solvent decanting: paints, inks, dyes and solvents transferred drum to drum or drum to process, with the shut-off in the operator’s hand.
• Chemical injection and additive tanks: oilfield and petrochemical sites that swap additive tanks and transfer hoses frequently, where 316 stands up to the media.
• Food and beverage bulk transfer: stainless steel valves for unloading raw ingredients or cleaning solutions from tankers and totes into holding tanks — transfer duty, not the hygienic product line itself.
• Agricultural liquid fertilizer transfer: also suits nurse-tank and sprayer-fill lines where a metal valve is preferred over polypropylene.

Häufig gestellte Fragen

What is a camlock valve? A shut-off valve with a cam-and-groove (camlock) adapter built into the body. This one is a two-piece stainless steel ball valve: the male camlock end couples to a standard hose coupler, the other end is threaded.

Was ist der Unterschied zwischen Typ A und Typ F? Die Ausführung Typ A verfügt am Ventilende über ein Innengewinde; die Ausführung Typ F verfügt über ein Außengewinde. Beide sind am anderen Ende mit dem gleichen Camlock-Adapter mit Außengewinde ausgestattet.

Welche Gewindenormen können Sie liefern? PT-, NPT- und PF-Gewinde werden alle auf Bestellung gefertigt. Bitte geben Sie bei Ihrer Anfrage den Gewindenorm an.

Passt es auf handelsübliche Camlock-Kupplungen? Yes — the male adapter end mates with standard cam-and-groove couplers of the same size.

Was bedeutet 1000 WOG? The valve body is rated for 1000 psi of non-shock cold working pressure on water, oil or gas. The hose connection as a whole is limited by the coupler and hose rating, which is usually much lower.

Should I order 304 or 316? Both are made to order. Pick 316 when the medium carries chlorides — brine, seawater, many chemical transfers — because molybdenum resists chloride pitting. For plain water and non-chloride liquids, 304 is sufficient.

Can it be used on compressed air or steam? No. Cam-and-groove couplings are not used on compressed gas or steam service, so the camlock valve is for liquid transfer only.