Stainless Steel Flanged Check Valve – Swing Type, 2″–4″, Class 150 / JIS 10K

Produktbeschreibung

This 304 flanged check valve is a swing-type non-return valve for 2″, 3″ and 4″ flanged lines. A hinged disc swings open with forward flow and drops shut when flow stops or reverses — no power, no operator. The body, disc, arm and bonnet are cast 304 stainless steel (CF8), with a CF8M (cast 316) version made to order, sealed with a PTFE gasket.

Every size is available with two flange standards: ASME B16.5 Class 150 for American-spec piping, or JIS B2220 10K for Asian-spec plants. Smaller line? Our threaded swing check valve covers 1/2″–3″, the one-piece silent check valve covers 1/2″–2″, or browse all Rückschlagventile aus Edelstahl.

Models & Sizes

Class 150 or JIS 10K — Which Flange?

The two standards use different bolt circles, flange diameters and raised faces, so they do not bolt together — a Class 150 valve cannot be mounted on JIS 10K counter-flanges, or the other way around. The valve body itself is the same; only the flange drilling changes. Choose by the standard your piping already uses: ASME B16.5 Class 150 is the norm in US-spec plants, JIS B2220 10K in Japanese- and much Asian-spec equipment. If you are not sure, tell us when you request a quote — the face-to-face length is identical for both, so the choice never affects your pipe layout.

Wichtige technische Spezifikationen

Anwendungen

• Pump discharge lines — stops backflow and reverse rotation when the pump shuts down.
• Wasseraufbereitung and distribution mains, 2″–4″ — the service that AWWA C508 swing check valves are written for.
• Wastewater lift stations — force-main protection on screened wastewater (not sludge or slurry).
• Chemical and petrochemical process piping — general one-way flow protection (not dosing-pump service).
• HVAC chilled-water and condenser-water pumps — in commercial building mechanical rooms.
• Cooling-tower and heat-exchanger loops — cooling-water circulation in industrial plants.
• General plant water piping — power and pulp-and-paper plants (not boiler feed).

Flanged ends let the valve be unbolted for inspection or cleaning without cutting the line. For threaded lines, see the stainless steel swing check valve.

Häufig gestellte Fragen

Are Class 150 and JIS 10K flanges interchangeable? No. The bolt circles, flange diameters and raised faces differ, so a Class 150 valve will not bolt onto JIS 10K counter-flanges or vice versa. Match the valve to the flange standard your piping already uses — we stock both for every size.

Which sizes are available? Three models: C-2F is 2″, C-3F is 3″ and C-4F is 4″, each with ASME Class 150 or JIS 10K flanges. For 1/2″–3″ threaded lines, see our threaded swing check valve.

What material is the valve? Body, disc, arm and bonnet are cast 304 stainless steel (CF8), with a PTFE gasket — in stock. A cast 316 (CF8M) version is made to order for chloride-bearing or more corrosive media.

How does the swing mechanism work? The disc hangs on a hinged arm inside the body. Forward flow pushes it open; when flow stops or reverses, the disc swings back onto the seat and blocks backflow automatically — no power or operator needed.

Where can I find the dimensions? Each model and flange standard has its own dimension sheet — download the PDF from the cards at the top of this page. It includes the assembly drawing, flange dimensions and face-to-face length.

Wie hoch ist der Mindestbestellwert? Keine Mindestbestellmenge – wir nehmen Bestellungen jeder Größe entgegen, einschließlich kleiner Probebestellungen. Bei Kleinbestellungen wird der Versand vom Käufer organisiert und bezahlt. Die Zahlung erfolgt per Überweisung (T/T) – 30% bei Auftragsbestätigung, 70% vor Versand.