Hygienisches 3-Wege-Kugelventil – manuell, L-Anschluss oder T-Anschluss, Tri-Clamp, 316

Produktbeschreibung

A sanitary 3 way ball valve, manual. 316 stainless, polished, with Tri-Clamp or American OD-tube butt weld ends, 1/2″ to 2″, rated 1000 WOG. Turn the lever and the flow goes somewhere else — no air line, no wiring, no PLC.

Two things decide whether this valve works for you, and both of them are decisions you make when you order, not afterwards. L-port or T-portund which seat. Get either one wrong and the valve is scrap. Both are below.

L-Port or T-Port? This Is Where People Buy the Wrong Valve

They look identical from the outside. Inside, the hole through the ball is a different shape, and they do completely different jobs.

← Wischen Sie über die Tabelle, um alle Spalten anzuzeigen →

If you are not sure which one your line needs, describe what the valve has to do and we will tell you. It takes us one email and saves you a valve.

The Seat Decides Your Temperature Limit

The seat is PTFE either way. What changes is how much of the ball it wraps.

← Wischen Sie über die Tabelle, um alle Spalten anzuzeigen →

This is a real trade-off, not a marketing choice. If you are running product that must not be trapped, take the encapsulated seat and live with 70°C. If your line runs hot, take the semi-encapsulated seat. Tell us the medium and the temperature and we will tell you which one you need — we are not going to sell you a seat that fails in six months.

Technische Daten

Manual Only — If You Want It Automated, Buy the Other One

This valve is built to be turned by hand. It has no actuator mounting pad, so you cannot bolt an air actuator onto it later.

If you need the valve to divert on a signal from a PLC, buy the Hygienisches pneumatisches 3-Wege-Kugelventil instead — same valve, same L/T port choice, with a rack-and-pinion air actuator on top. Better to know now than after the valve arrives.

Cleaning It

Undo the clamps and the valve comes off the line. Undo the body bolts and it comes apart in your hands — ball out, seats out, everything you need to inspect and swab. Nothing needs cutting, and nothing needs a special tool.

The encapsulated seat is the one that matters here: by filling the dead space around the ball, it leaves the bore smooth, with no crevice for product to lodge in and no pocket for a swab to miss.

Dort, wo es hingehört

• Beverage lines — switching between fillers, or between product and the return loop.
• Dairy and food processing — diverting between tanks, or combining two feeds into one line.
• Pilot plant and small batch — where an operator is standing right there and a lever beats a solenoid.
• Sampling manifolds — one turn takes product to the sample port instead of the line.

Abmessungen

The dimension sheet for the sanitary 3-way is being drawn up. Email us the size, the port type and the end connection, and we will send you the dimensions the same day — Wir würden Ihnen lieber die tatsächlichen Zahlen zukommen lassen, als etwas zu veröffentlichen, das wir nicht überprüft haben.

Bei uns einkaufen

• Es gibt keine Mindestbestellmenge.
• Hersteller, kein Handelsunternehmen. Unsere eigene Fabrik in Taiwan – Edelstahlventile seit 1999.
• Mühlenzertifikat auf Anfrage.
• Angebotsbearbeitungszeit: innerhalb von 24 Stunden.

Angebot anfordern – Antwort innerhalb von 24 Stunden →

Tell us the size, L-port or T-port, Tri-Clamp or butt weld, and the temperature of the line. That is enough for us to quote.

Häufig gestellte Fragen

L-port or T-port — which one do I need?

L-port diverts: it sends the inlet to one outlet or the other. T-port mixes or distributes: it can feed two ports at once. If you are switching a line between two destinations, you want L-port. If you are combining two streams, or splitting one into two at the same time, you want T-port. Describe what the valve has to do and we will tell you which one.

What is the maximum temperature?

It depends on the seat. The encapsulated seat runs −20°C to 70°C. The semi-encapsulated seat runs −20°C to 180°C. Tell us the temperature of your line and we will fit the right one.

Which seat should I choose?

Encapsulated if product must not sit in a crevice — the PTFE fills the dead space around the ball, so the bore stays smooth. Semi-encapsulated if the line runs above 70°C. It is a genuine trade-off between temperature and dead space, and we will help you pick.

Can I add an actuator later?

No. This valve has no actuator mounting pad. If you need it automated, buy the sanitary pneumatic 3-way ball valve instead — same valve, same L/T port choice, with an air actuator fitted.

What end connections do you offer?

Tri-Clamp, or butt weld to American OD tube dimensions.

Welche Größen bieten Sie an?

1/2″ to 2″.

How do I clean it?

Undo the clamps to take the valve off the line, then undo the body bolts and it comes apart by hand — ball out, seats out, everything reachable. No cutting, no special tools.

Wie hoch ist der Nenndruck?

1000 WOG.

Gibt es bei Ihnen eine Mindestbestellmenge?

Nein. Sagen Sie uns, was Sie benötigen, und wir erstellen Ihnen ein Angebot.

Alle Modelle von 3-Wege-Kugelhähnen anzeigen – manuell, pneumatisch, für den Sanitärbereich und Vakuumanwendungen →