製品名
Sanitary 3 Way Ball Valve — Manual, L-Port or T-Port, Tri-Clamp, 316 (MV-3N)
製品概要
Sanitary 3 way ball valve, manual. 316 stainless, polished, Tri-Clamp ends, 1/2″ to 2″, 1000 WOG.
Two decisions you make when you order:
- Lポート (diverts to one outlet または the other) vs Tポート (can feed two at once)
- Fully encapsulated seat (−20 °C to +80 °C, no dead space for product) vs semi-encapsulated (−20 °C to +180 °C)
Both are explained below. Tell us what the valve has to do and we will tell you which to order.
Hand lever operation. For automated lines, see the pneumatic version.
ISO 9001 · CE · Manufacturer since 1999 · Made in Taiwan
Sanitary 3 Way Ball Valve — Manual, 316, Tri-Clamp
A sanitary 3 way ball valve, hand operated. 316 stainless steel, polished, Tri-Clamp ends, 1/2″ to 2″, rated 1000 WOG. Turn the lever and the flow goes somewhere else: no air line, no wiring, no PLC. You will also see this valve called a hygienic 3-way ball valve, a 3 way sanitary ball valve or a tri clamp 3 way ball valve. Same valve.
316 is what we stock. 304 we can make to order.
Two things decide whether this valve works for you, and both of them are decisions you make when you order, not afterwards. L-port or T-portそして which seat. Both port types are stock builds, and both are explained below.
L-Port or T-Port? This Is Where People Buy the Wrong Valve
They look identical from the outside. Inside, the hole through the ball is a different shape, and they do completely different jobs.
| Lポート | Tポート | |
|---|---|---|
| 機能の説明 | Diverts. Sends the inlet to one outlet または the other. | Mixes or distributes. Can feed two ports at once. |
| Buy it when | You are switching a line between two destinations: filler A or filler B, product or return loop, tank 1 or tank 2. | You are combining two streams into one, or splitting one into two at the same time. |
| The mistake | Buying L when you needed to feed both lines together. It cannot. | Buying T when you needed a clean either/or. It will leak flow to the port you thought was shut. |
← テーブルをスワイプしてすべての列を表示 →
One structural point worth knowing before you specify a T-port: in every handle position it keeps at least two ports connected.
If you are not sure which one your line needs, describe what the valve has to do and we will tell you. It takes us one email and saves you a valve.
The Seat Decides Your Temperature Limit
The seat is PTFE either way. What changes is how much of the ball it wraps.
| シート | 動作温度 | Choose it when |
|---|---|---|
| Fully encapsulated (PTFE wraps the ball fully) |
−20 °C to +80 °C | Food and beverage lines, and anything where product must not sit in a crevice. The PTFE closes off the space around the ball, so there is nothing for product to lodge in. |
| Semi-encapsulated (PTFE wraps part of the ball) |
−20 °C ～ +180 °C | Hot water and hot process lines, anything running above 80 °C. It takes far more heat, but leaves more space around the ball. |
← テーブルをスワイプしてすべての列を表示 →
This is a real trade-off, not a marketing choice. If you are running product that must not be trapped, take the fully encapsulated seat and live with 80 °C. If your line runs hot, take the semi-encapsulated seat. Send us the medium and the working temperature, and we will specify the seat.
仕様
| 品目 | 仕様 |
|---|---|
| バルブの種類 | Sanitary 3 way ball valve, manual |
| ポート | Lポート (diverting) or Tポート (mixing). Both in stock |
| ボディ | 316 stainless steel, sanitary polish. 304 to order |
| 耐圧定格 | 1000 WOG |
| シート | PTFE. Fully encapsulated (−20 °C to +80 °C) or semi-encapsulated (−20 °C to +180 °C) |
| 端部の接続 | トライクランプ |
| サイズ範囲 | 1/2インチ – 2インチ |
| 操作 | Hand lever. No actuator mounting pad — the pneumatic version covers automated lines |
| Service media | Water, oil, compressed air |
| 原産国 | 台湾製 |
Taking It Apart for Cleaning
Undo the clamps and the valve comes off the line. Undo the body bolts and it comes apart in your hands: ball out, seats out, everything you need to inspect and swab. Nothing needs cutting, and nothing needs a special tool.
The fully encapsulated seat is the one that matters here. By filling the space around the ball it leaves the bore smooth, with no crevice for product to lodge in and no pocket for a swab to miss.
あるべき場所
- Switching a line between two destinations (L-port). One inlet, two outlets: tank 1 or tank 2, filler A or filler B, product line or return loop. One valve and one 90° turn does what two shut-off valves and a tee would do, with fewer fittings and one movement instead of two.
- Combining two feed streams into one line (T-port). Two ingredient lines meeting before a mixing tank or a common header, blended in the pipe instead of merged by hand.
- Bypass for maintenance (L-port). Route the line around a section that has to come out for service, then switch it back, without shutting the whole run down and without a second operator remembering to close a second valve.
- Sampling point on a process line. The third port takes product to a sample outlet while the main run keeps going.
- Product changeover on viscous or crystallising lines (L-port, fully encapsulated seat). Chocolate, syrups, sauces and concentrates collect in the space around a standard ball and dry or crystallise there. Filling that space is what makes changeover on these products manageable.
よくある質問
What is a sanitary 3 way ball valve?
A three-port ball valve in polished 316 stainless with Tri-Clamp ends, built so it can be taken off the line and opened for cleaning. The ball is drilled either L-shaped, to send one inlet to one of two outlets, or T-shaped, to feed two ports at once. It does the work of a tee plus two shut-off valves, with fewer fittings to install and one handle to turn instead of two.
LポートとTポート――どちらが必要でしょうか？
Lポートは分岐機能を持ち、流入流を一方の出口またはもう一方の出口へと送ります。Tポートは混合または分配機能を持ち、2つのポートに同時に流体を供給することができます。 2つの先への配管を切り替える場合は、Lポートが適しています。2つの流体を合流させる場合、あるいは1つの流体を同時に2つに分岐させる場合は、Tポートが適しています。バルブにどのような機能が必要かをお知らせいただければ、どちらが適しているかをご案内いたします。.
最高温度は何度ですか？
It depends on the seat. The fully encapsulated seat runs −20 °C to +80 °C. The semi-encapsulated seat runs −20 °C to +180 °C. Tell us the temperature of your line and we will fit the right one.
どの席を選べばいいですか？
Fully encapsulated if product must not sit in a crevice: the PTFE fills the space around the ball, so the bore stays smooth. Semi-encapsulated if the line runs above 80 °C. It is a genuine trade-off between temperature and dead space, and we will help you pick.
I need this valve automated — what do you offer?
Buy the sanitary pneumatic 3-way ball valve. Same valve, same L-port or T-port choice, with a rack-and-pinion air actuator fitted on top, double acting or spring return.
どのような端部接続をご用意していますか？
Tri-Clamp.
どのようなサイズを取り扱っていますか？
1/2″ to 2″.
Can I get it in 304?
Yes, to order. 316 is what we stock.
どうやって掃除すればいいですか？
Undo the clamps to take the valve off the line, then undo the body bolts and it comes apart by hand: ball out, seats out, everything reachable. No cutting, no special tools.
定格圧力はどれくらいですか？
1000 WOG。.
Do you supply a material certificate?
Yes. Ask for the mill certificate with your order and we will send it with the shipment.
最低注文数量はありますか？
いいえ。ご要望をお聞かせいただければ、お見積もりいたします。.
サンプル・ポリシー
お客様の品質評価やテストのために、製品サンプルを喜んでご提供いたします。プロセスは通常、お客様の仕様に基づいたお見積もりから始まります。
価格設定にご納得いただければ、製品の種類や在庫状況に応じて、無料または有償でサンプルをご提供いたします。
送料はお客様のご負担となります。
ご注文の流れ
製品の要件やその他の詳細をお客様と確認した後、承認のための販売確認書を発行します。確認後、30%デポジットをお支払いいただき、生産を開始します。
大量生産が完了し、商品が検査に合格した場合、お客様は出荷手配前に残金70%を支払う必要があります。
関連商品
-
サニタリーボールバルブ（トライクランプ）Sanitary Butterfly Valve — Pneumatic Wafer Body, 304 Stainless, Tri-Clamp
よくある質問
A.見積もり依頼の方法を教えてください。
製品仕様、材料、数量、特別なご要望を含む詳細なお問い合わせシートをご提示ください。お客様のご要望に基づき、お見積もりをさせていただきます。
B.見積条件は何ですか？
私たちの見積もりは通常、以下の内容に基づいています。 本船渡し条件.しかし、我々はまた、提供することができる CFR、CIFまたはご要望に応じて他のインコタームズ。
C.最小発注量（MOQ）はいくらですか？
MOQ depends on the product. We operate on a made-to-order basis, and trial orders are welcome. For smaller orders, freight is arranged and borne by the buyer.
D.支払条件を教えてください。
T/T - 注文確認時に30%の頭金を支払い、出荷前に70%の残金を支払う。
E.リードタイムはどのくらいですか？
納期は注文数量や仕様によって異なります。お客様からご連絡をいただいた際に、正確なスケジュールをご確認させていただきます。 お見積りをご依頼ください。.
もっと知りたい？
当社の製品やサービスにご興味をお持ちの方は、下記のフォームにご記入ください。 必要な情報を提供するために、私たちのチームができるだけ早くご連絡させていただきます。