Sanitary 3 Way Ball Valve — Manual, L-Port or T-Port, Tri-Clamp, 316 (MV-3N)

Sanitary 3 Way Ball Valve — Manual, 316, Tri-Clamp

A sanitary 3 way ball valve, hand operated. 316 stainless steel, polished, Tri-Clamp ends, 1/2″ to 2″, rated 1000 WOG. Turn the lever and the flow goes somewhere else: no air line, no wiring, no PLC. You will also see this valve called a hygienic 3-way ball valve, a 3 way sanitary ball valve or a tri clamp 3 way ball valve. Same valve.

316 is what we stock. 304 we can make to order.

Two things decide whether this valve works for you, and both of them are decisions you make when you order, not afterwards. L-port or T-portund which seat. Both port types are stock builds, and both are explained below.

L-Port or T-Port? This Is Where People Buy the Wrong Valve

They look identical from the outside. Inside, the hole through the ball is a different shape, and they do completely different jobs.

← Wischen Sie über die Tabelle, um alle Spalten anzuzeigen →

One structural point worth knowing before you specify a T-port: in every handle position it keeps at least two ports connected.

If you are not sure which one your line needs, describe what the valve has to do and we will tell you. It takes us one email and saves you a valve.

The Seat Decides Your Temperature Limit

The seat is PTFE either way. What changes is how much of the ball it wraps.

← Wischen Sie über die Tabelle, um alle Spalten anzuzeigen →

This is a real trade-off, not a marketing choice. If you are running product that must not be trapped, take the fully encapsulated seat and live with 80 °C. If your line runs hot, take the semi-encapsulated seat. Send us the medium and the working temperature, and we will specify the seat.

Technische Daten

Taking It Apart for Cleaning

Undo the clamps and the valve comes off the line. Undo the body bolts and it comes apart in your hands: ball out, seats out, everything you need to inspect and swab. Nothing needs cutting, and nothing needs a special tool.

The fully encapsulated seat is the one that matters here. By filling the space around the ball it leaves the bore smooth, with no crevice for product to lodge in and no pocket for a swab to miss.

Dort, wo es hingehört

• Switching a line between two destinations (L-port). One inlet, two outlets: tank 1 or tank 2, filler A or filler B, product line or return loop. One valve and one 90° turn does what two shut-off valves and a tee would do, with fewer fittings and one movement instead of two.
• Combining two feed streams into one line (T-port). Two ingredient lines meeting before a mixing tank or a common header, blended in the pipe instead of merged by hand.
• Bypass for maintenance (L-port). Route the line around a section that has to come out for service, then switch it back, without shutting the whole run down and without a second operator remembering to close a second valve.
• Sampling point on a process line. The third port takes product to a sample outlet while the main run keeps going.
• Product changeover on viscous or crystallising lines (L-port, fully encapsulated seat). Chocolate, syrups, sauces and concentrates collect in the space around a standard ball and dry or crystallise there. Filling that space is what makes changeover on these products manageable.

Häufig gestellte Fragen

What is a sanitary 3 way ball valve?

A three-port ball valve in polished 316 stainless with Tri-Clamp ends, built so it can be taken off the line and opened for cleaning. The ball is drilled either L-shaped, to send one inlet to one of two outlets, or T-shaped, to feed two ports at once. It does the work of a tee plus two shut-off valves, with fewer fittings to install and one handle to turn instead of two.

L-port or T-port — which one do I need?

L-port diverts: it sends the inlet to one outlet or the other. T-port mixes or distributes: it can feed two ports at once. If you are switching a line between two destinations, you want L-port. If you are combining two streams, or splitting one into two at the same time, you want T-port. Describe what the valve has to do and we will tell you which one.

What is the maximum temperature?

It depends on the seat. The fully encapsulated seat runs −20 °C to +80 °C. The semi-encapsulated seat runs −20 °C to +180 °C. Tell us the temperature of your line and we will fit the right one.

Which seat should I choose?

Fully encapsulated if product must not sit in a crevice: the PTFE fills the space around the ball, so the bore stays smooth. Semi-encapsulated if the line runs above 80 °C. It is a genuine trade-off between temperature and dead space, and we will help you pick.

I need this valve automated — what do you offer?

Buy the Hygienisches pneumatisches 3-Wege-Kugelventil. Same valve, same L-port or T-port choice, with a rack-and-pinion air actuator fitted on top, double acting or spring return.

What end connections do you offer?

Tri-Clamp.

Welche Größen bieten Sie an?

1/2″ to 2″.

Can I get it in 304?

Yes, to order. 316 is what we stock.

How do I clean it?

Undo the clamps to take the valve off the line, then undo the body bolts and it comes apart by hand: ball out, seats out, everything reachable. No cutting, no special tools.

Wie hoch ist der Nenndruck?

1000 WOG.

Do you supply a material certificate?

Yes. Ask for the mill certificate with your order and we will send it with the shipment.

Gibt es bei Ihnen eine Mindestbestellmenge?

Nein. Sagen Sie uns, was Sie benötigen, und wir erstellen Ihnen ein Angebot.