Sanitary Pneumatic Ball Valve – 3-Piece 316, Tri-Clamp or OD-Tube Butt Weld, ISO 5211 High-Mount, DA or SR (V-3NM / V-3NM-L3)

Sanitary Pneumatic Ball Valve: 3-Piece 316, Tri-Clamp or Butt Weld

This sanitary pneumatic ball valve is the V-3NM high-mount three-piece valve with a rack-and-pinion air actuator on top — double-acting (DA) or spring-return (SR), running on a 4–8 bar air supply. The valve body and ball are cast 316 stainless steel (ASTM A351 CF8M), full port, rated 1000 WOG, with a PTFE seat in fully or semi encapsulated form. 316 is the stock material and 304 (CF8) is made on request.

Two end styles cover both ways a hygienic line is built: Tri-Clamp ferrules on the V-3NM, or extended OD-tube butt-weld ends on the V-3NM-L3. You will also see this style called a hygienic actuated ball valve, a tri clover pneumatic valve or simply a sanitary pneumatic valve. Prefer a hand lever? See the tri clamp ball valve; ；至於工業用螺紋管線，該 三片式氣動球閥; ；或瀏覽全部 衛生級球閥（Tri-Clamp）.

雙作用式還是彈簧回位式？

Which way the valve should fail is a process question, not a preference: it depends on whether continuing to flow or stopping flow is the larger risk on that line. Tell us the position you want on air loss and we build the actuator to match.

ISO 5211 High-Platform Pad: Actuator Bolts Straight On

The mounting pad is cast into the valve body as a raised platform and drilled to ISO 5211, F03 to F10 depending on size. The actuator bolts directly to it, so there is no bracket to fabricate and no coupling to machine, and the raised platform keeps the actuator clear of the valve body and of the line itself. The top of the actuator carries the standard pads for a solenoid valve, a limit switch box or a positioner.

Tri-Clamp 還是對焊？

Cavity Filled Ball Valve Seat: Fully or Semi Encapsulated PTFE

The PTFE seat wraps around the ball and fills the body cavity where product could otherwise collect. The fully encapsulated (cavity filled) seat fills the most cavity and is rated −20 to +80 °C; the semi encapsulated seat is rated −20 to +180 °C. Both are available on the V-3NM and the V-3NM-L3 — tell us which one your process needs.

主要技術規格

致動器規格

Three-Piece Body: Service Without Cutting the Line

The body unbolts into three pieces in place. The bore can be inspected, the internals cleaned and the seats replaced without cutting the valve out of the run and without lifting the actuator off its pad — which matters on a line where the valve is one of many in a sequence.

應用

• Automated cleaning cycles on food and beverage lines: The cleaning program drives the valves open and closed on its own schedule, which keeps operators away from hot caustic and steam instead of walking the line turning handles.
• Brewery and beverage transfer sequencing: Where a PLC runs transfer, filling and rinse steps as a sequence, several valves have to move in a defined order with interlocks so two paths never open at once.
• Batch changeover lines: Plants that switch product, flavour or recipe on the same line cycle their valves many times a day. Double-acting actuators have no springs to fatigue, so they suit that duty.
• Lines tied into PLC or HMI control: Once a line is monitored centrally, each valve needs a solenoid to take the signal and a limit switch box to report its position. Both bolt to the standard pads on this actuator.

常見問題

What is a sanitary pneumatic ball valve?

A hygienic ball valve with an air actuator on top instead of a hand lever. The body is 316 stainless steel with a smooth full-port bore and no threads for product to lodge in; the rack-and-pinion actuator opens and closes it from a control signal. Pneumatic control sanitary ball valve, sanitary pneumatic valve and hygienic actuated ball valve all describe the same thing.

Double-acting or spring-return — which should I choose?

Double-acting (DA) uses air for both strokes and stays in its last position if air is lost. Spring-return (SR) uses springs for the return stroke, so on air loss the springs move the valve to its preset open or closed position. Which position is the safe one depends on your process, so specify it when you order.

我可以加裝電磁閥或限位開關嗎？

Yes. The actuator accepts a solenoid valve for electrical control, a limit switch box for position feedback, and a positioner for modulating service. Tell us your control setup when you request a quote.

Why a pneumatic actuator rather than an electric one?

A pneumatic actuator has no internal electronics, so it is not exposed to the short-circuit risk that moisture ingress creates for electric units — which matters in a washdown area. It also takes its drive straight from the plant air supply, at 4–8 bar on this actuator.

高位安裝的 ISO 5211 墊片有何作用？

It is a raised mounting platform cast into the valve, drilled to ISO 5211 (F03–F10 by size). The actuator bolts straight on — no bracket or custom coupling — and the raised platform keeps the actuator clear of the valve body.

Tri-Clamp or butt weld — which ends should I choose?

Tri-Clamp (V-3NM) if the line is taken apart and cleaned often — the clamp opens without tools. Extended butt weld (V-3NM-L3) for permanently welded runs — the long ends keep welding heat away from the seals.

其溫度額定值為何？

It depends on the seat: −20 to +180 °C with the semi encapsulated PTFE seat, −20 to +80 °C with the fully encapsulated seat. The actuator is rated −20 to +80 °C. Pressure rating is 1000 WOG.

Is 304 stainless available?

316 (CF8M) is the stock material. 304 (CF8) is made on request — state it on the enquiry.

這個閥門可以拆開來清潔嗎？

Yes. The three-piece body unbolts in place, so you can inspect the bore, clean the internals or replace the seats without cutting the valve out of the line or removing the actuator from its pad.

What decides the price of a sanitary pneumatic ball valve?

Size, end style (clamp or extended weld), seat type (fully or semi encapsulated), actuator type (DA or SR), any accessories such as a solenoid or limit switch box, material (316 stock or 304 on request) and quantity. Send line sizes, end style and actuator type and we quote each item.

最低訂購量是多少？

No minimum order quantity — we accept orders of any size, including small trial orders. For small orders, freight is arranged and paid by the buyer.