Manual Flanged Ball Valve – 304/316 Stainless Steel, Full Port (JIS 10K/20K, ANSI Class 150/300)

Product Description

Flanged ball valves are preferred in industry because they are easy to install and remove from
the line without disturbing the pipe alignment. This series features a full port (full bore) design
for unimpeded flow and a robust floating ball mechanism. The wide range of pressure ratings allows
engineers to select the exact specification needed for low-pressure water or high-pressure steam/gas
lines.

Key Technical Specifications

• Body Material: ASTM 304 or 316 Stainless Steel
• Size Range: 1/2″ ~ 8″ for JIS 10K & ANSI Class 150 / 1/2″ ~ 4″ for JIS 20K
  & ANSI Class 300
• Standards: JIS 10K, 20K / ANSI Class 150 (150#), Class 300 (300#)
• Connection: Flanged (RF – Raised Face)
• Seat Material: PTFE
• Working Temperature: -20°C to +180°C
• Operation: Manual Lever Handle

Common sizes include 1-inch, 2-inch, 3-inch and 4-inch flanged ball valves, with 6-inch and
8-inch options available in JIS 10K and ANSI Class 150.

Pressure Rating Comparison

Note: Values above are flange-class ratings at ambient temperature. Actual working pressure
decreases as service temperature rises, and the PTFE seat governs the practical limit in service.
Contact us with your line conditions for a suitable recommendation.

Advantages & Benefits

• Secure Connection: Flanges provide the strongest joint for industrial piping,
  minimizing leak risks.
• Broad Pressure Range: Available options for standard (Class 150 / JIS 10K) and
  high pressure (Class 300 / JIS 20K) needs.
• Ease of Service: The entire valve body can be unbolted and removed for
  maintenance.
• Material Choice: Choose 316SS for chloride-bearing or corrosive media (added
  molybdenum resists pitting), or 304SS for general utility.

Application Fields & Locations

• Refineries & Petrochemical: Process lines carrying hydrocarbons.
• Power Plants: Steam and cooling water isolation.
• Public Works: Water distribution networks.
• Heavy Manufacturing: Central utility shut-off valves.

FAQ

Which flange standards and pressure ratings are available? Four standards: JIS 10K (1.0 MPa, about 145 psi) and ANSI Class 150 (275 psi) both in 1/2″–8″; JIS 20K (2.0 MPa, about 290 psi) and ANSI Class 300 (720 psi) in 1/2″–4″. All are raised-face (RF) flanges. Match the standard your piping already uses.

Should I choose 304 or 316 stainless steel? 304 (CF8) suits general water, air and process lines. 316 (CF8M) adds molybdenum for better resistance to pitting from chlorides — the safer choice for coastal, marine and chemical service.

Is it full port? Yes. The bore matches the pipe inside diameter, so the open valve adds almost no flow restriction.

What is the operating temperature? -20 °C to +180 °C. The flange class sets the pressure ceiling, but the PTFE seat governs the practical limit in service — pressure derates as temperature rises.

How do I pick the right pressure rating? Start from the flange standard your counter-flanges use (ANSI or JIS), then confirm the class covers your line pressure at its working temperature. Tell us your line conditions and we will recommend a suitable rating.

What is the minimum order? No minimum order quantity — we accept orders of any size, including small trial orders. For small orders, freight is arranged and paid by the buyer. Payment is by T/T — 30% on order confirmation, 70% before shipment.

Sample Policy

We are happy to provide product samples for customers to evaluate quality or conduct testing. The
process typically begins with a quotation based on the customer’s specifications.

If the pricing is acceptable, we can offer samples either free of charge or at a cost depending
on the product type and availability. Shipping fees are borne by the customer.

Order Process

After confirming the product requirements and other details with the customer, we will issue a
Sales Confirmation for approval. Once confirmed, the customer is required to pay a 30% deposit to
proceed with production.

When mass production is completed and the goods pass inspection, the customer must pay the
remaining 70% balance before shipment is arranged.