製品名
2ピース式高圧ボールバルブ、2000 WOG – フルポート、PT/NPTねじ式
製品概要
A two-piece high pressure ball valve rated 2000 WOG (2000 psi) — double the standard rating. Cast 316 stainless steel (ASTM A351 CF8M) in stock, CF8 (cast 304) made to order. Full port, PTFE seats, female PT and NPT threads both in stock, sizes 1/4″–2″. A drilled mounting pad on every size means a pneumatic or electric actuator can be added later.
ISO 9001・CE・1999年より製造
製品説明
The V-2NF is a two-piece high pressure ball valve rated 2000 WOG (2000 psi) — twice the rating of a standard 1000 WOG two-piece valve. The body, cap and ball are cast in ASTM A351 CF8M, the cast form of 316 stainless steel, with a full-port bore that matches the pipe inside diameter so flow is not restricted. A CF8 (cast 304) version is made to order.
Female PT and NPT threads are both in stock, sizes 1/4″ to 2″, and every size carries a drilled mounting pad on the body — so a pneumatic or electric actuator can be fitted directly later without changing the valve. It covers hydraulic circuits and high-pressure water, oil and gas lines where a standard-rated valve would be running at its limit.
1000 WOG or 2000 WOG?
| Standard two-piece (1000 WOG) | V-2NF high pressure (2000 WOG) | |
|---|---|---|
| Rated pressure | 1000 psi water, oil, gas | 2000 psi water, oil, gas |
| Typical duty | General plumbing and process lines | Hydraulic circuits and lines with pressure spikes |
| Where to buy | Two-piece ball valve, 1000 WOG | This page |
主要技術仕様
| 種類 | High pressure ball valve — two-piece, manual |
| モデル | V-2NF |
| サイズ範囲 | 1/4インチ – 2インチ |
| 使用圧力 | 2000 WOG (2000 psi) |
| ポート | Full port — bore matched to pipe inside diameter |
| Body, cap & ball | ASTM A351 CF8M(316ステンレス鋼の鋳造品)は在庫あり。CF8(鋳造304)は受注生産となります。 |
| シート | PTFE |
| ステム | SS316 / SS304, matching the body material |
| 端部の接続 | Female PT and NPT threads — both in stock |
| ハンドル | SS304 lever with locking plate, vinyl grip |
| アクチュエータの取り付け | Drilled mounting pad on every size — 10-24 UNC (1/4″–3/4″) or 1/4″-20 UNC (1″–2″) threads |
| メディア | Water, oil, gas, hydraulic fluid |
材料
Fourteen parts, matching the numbered circles ①–⑭ in the drawing below. Materials shown for the 316 version in stock; the made-to-order 304 version uses CF8 castings.
| そうだ。 | パート | 素材 | 数量 |
|---|---|---|---|
| 1 | ボディ | A351 CF8M (CF8 to order) | 1 |
| 2 | キャップ | A351 CF8M (CF8 to order) | 1 |
| 3 | ボール | A351 CF8M (CF8 to order) | 1 |
| 4 | シート | PTFE | 2 |
| 5 | ステム | SS316 / SS304 | 1 |
| 6 | ガスケット | PTFE | 1 |
| 7 | Thrust washer | PTFE | 1 |
| 8 | Stem packing | PTFE | 1 |
| 9 | グランド | SS304 | 1 |
| 10 | ハンドル | SS304 | 1 |
| 11 | スプリングワッシャー | SS304 | 1 |
| 12 | ハンドルナット | SS304 | 1 |
| 13 | Handle sleeve | Vinyl grip | 1 |
| 14 | ロックプレート | SS304 | 1 |
Dimensions (mm) & Cv

Cv is the flow coefficient — how many US gallons per minute pass through the open valve at a 1 psi pressure drop. Full drawing in the V-2NF dimension sheet (PDF).
| サイズ | 穴径 Ød | L | H | D1 | Pad thread | W2 | A | Cv |
|---|---|---|---|---|---|---|---|---|
| 1/4インチ | 11.0 | 59.5 | 53.5 | 103 | 10-24 UNC | 28.5 | 12.5 | 16 |
| 3/8インチ | 12.5 | 59.5 | 56.4 | 103 | 10-24 UNC | 28.5 | 12.5 | 16 |
| 1/2″ | 15.0 | 63.5 | 55.0 | 103 | 10-24 UNC | 28.5 | 12.5 | 26 |
| 3/4″ | 20.0 | 76.7 | 66.0 | 103 | 10-24 UNC | 28.5 | 12.5 | 55 |
| 1″ | 25.0 | 90.5 | 71.0 | 127 | 1/4″-20 UNC | 35 | 23 | 110 |
| 1-1/4インチ | 32.0 | 98.5 | 89.0 | 127 | 1/4″-20 UNC | 37.5 | 25.4 | 180 |
| 1-1/2インチ | 40.0 | 118.0 | 92.0 | 153 | 1/4″-20 UNC | 37.5 | 25.4 | 270 |
| 2″ | 50.8 | 136.0 | 107 | 193 | 1/4″-20 UNC | 38 | 25.4 | — |
利点とメリット
- Double the pressure rating: 2000 WOG covers hydraulic circuits and pressure spikes that push a standard 1000 WOG valve to its limit.
- Full port, published Cv: the bore matches the pipe inside diameter, and the flow coefficient for each size is in the table above — no guessing at pressure drop.
- アクチュエータ対応: the drilled mounting pad lets you bolt on a pneumatic or electric actuator later — see our air actuated ball valve for the automated option.
- 316 corrosion resistance: CF8M body with added molybdenum resists pitting from chloride-bearing media.
適用分野と設置場所
- Hydraulic systems: shut-off duty on hydraulic circuits running at pressures a standard valve cannot hold.
- High-pressure water, oil & gas lines: chemical, oil & gas piping with elevated working pressure.
- 水処理: pump discharge and distribution points where pressure spikes occur.
- Industrial equipment: machine builders who need a compact threaded valve with a 2000 psi margin.
よくある質問
What does 2000 WOG mean? WOG stands for Water, Oil, Gas — the media the rating covers. 2000 WOG means the valve is rated for 2000 psi working pressure at room temperature, twice the 1000 WOG rating of a standard two-piece ball valve.
When do I need 2000 WOG instead of 1000 WOG? When the line pressure or its spikes approach 1000 psi — hydraulic circuits are the typical case. For general plumbing and process lines, our standard two-piece ball valve at 1000 WOG is usually enough.
フルポートですか? Yes. The bore matches the pipe inside diameter — see the Bore Ød column in the dimensions table — so the open valve adds almost no flow restriction.
どのようなねじ規格がありますか? Female PT and NPT are both in stock, sizes 1/4″–2″. Tell us which standard your piping uses when you request a quote.
ステンレス鋼は304と316のどちらを選べばいいでしょうか? The stock version is cast 316 (CF8M), whose molybdenum resists pitting from chlorides — the safer default for outdoor, coastal and chemical service. A cast 304 (CF8) version is made to order for milder media.
最低注文数はいくらですか? 最低注文数量の制限はありません。少量の試用注文を含め、どのような数量の注文でも承ります。少量の注文の場合、送料の手配および支払いは購入者側で行っていただきます。お支払いはT/T(電信送金)にて、注文確認時に30%、出荷前に70%をお支払いください。.
サンプル・ポリシー
お客様の品質評価やテストのために、製品サンプルを喜んでご提供いたします。プロセスは通常、お客様の仕様に基づいたお見積もりから始まります。
価格設定にご納得いただければ、製品の種類や在庫状況に応じて、無料または有償でサンプルをご提供いたします。
送料はお客様のご負担となります。
ご注文の流れ
製品の要件やその他の詳細をお客様と確認した後、承認のための販売確認書を発行します。確認後、30%デポジットをお支払いいただき、生産を開始します。
大量生産が完了し、商品が検査に合格した場合、お客様は出荷手配前に残金70%を支払う必要があります。
関連商品
よくある質問
A.見積もり依頼の方法を教えてください。
製品仕様、材料、数量、特別なご要望を含む詳細なお問い合わせシートをご提示ください。お客様のご要望に基づき、お見積もりをさせていただきます。
B.見積条件は何ですか?
私たちの見積もりは通常、以下の内容に基づいています。 本船渡し条件.しかし、我々はまた、提供することができる CFR、CIFまたはご要望に応じて他のインコタームズ。
C.最小発注量(MOQ)はいくらですか?
MOQはありません。オーダーメイドで、どんなサイズのご注文でも承ります。 歓迎する。小口注文の場合、運賃は買い手が負担する。.
D.支払条件を教えてください。
T/T - 注文確認時に30%の頭金を支払い、出荷前に70%の残金を支払う。
E.リードタイムはどのくらいですか?
納期は注文数量や仕様によって異なります。お客様からご連絡をいただいた際に、正確なスケジュールをご確認させていただきます。 お見積りをご依頼ください。.
もっと知りたい?
当社の製品やサービスにご興味をお持ちの方は、下記のフォームにご記入ください。 必要な情報を提供するために、私たちのチームができるだけ早くご連絡させていただきます。





