A manual, a pneumatic and an electric ball valve can share the same body, the same seats and the same fluid conditions. The difference is not inside the valve. It is in who or what rotates the ball, how often it happens, and what the system should do when air or power is lost. Selection […]
La higiene en una planta alimentaria o biotecnológica es una propiedad del sistema. Depende del diseño de toda la línea, del procedimiento de limpieza que se aplica en ella y de la verificación que demuestra que dicho procedimiento funciona. Ninguna válvula la garantiza por sí sola, y un cuerpo pulido con un extremo Tri-Clamp no es prueba de nada por sí mismo.
Semiconductor plants run two very different piping worlds. The process side touches the wafer: ultra-high-purity gas panels, chamber isolation, tool-level control. The facility side keeps everything else running: cooling water, compressed air, nitrogen, DI water, chemical feed lines, and the vacuum pumps that back the tools. This guide answers one practical question: where do 316
Válvulas de acero inoxidable 316 para instalaciones de semiconductores y líneas de vacío Leer más »
A working pneumatic ball valve automation package is more than a valve with an air cylinder on top. Before anything is ordered, at least seven things need to be confirmed: the valve body, the pneumatic actuator, the solenoid valve, air preparation and tubing, position feedback, the control signal, and the required behavior when air or
Automatización de válvulas de bola neumáticas: qué debe incluir el paquete completo Leer más »
3-piece ball valve maintenance is built around one simple idea: the two end caps stay threaded or welded to the pipe, and the center section unbolts and comes out. Seats and seals can be replaced on a bench without cutting the line. For welded systems in particular, that is the difference between a planned maintenance
Instalación y mantenimiento de válvulas de bola de acero inoxidable de tres piezas Leer más »
