產品名稱
NAMUR 電磁閥 — 5/2 通及 3/2 通，IP67，24VDC/110VAC/220VAC
產品摘要
NAMUR direct-mount solenoid valve. Bolts onto the actuator — no fittings, no tubing between them.
Order the one that matches your actuator:
- 5/2 通式 → double acting (DA)
- 3/2 way → spring return (SR)
G1/4 air connection · 4–8 bar · IP67 · 24V DC / 110V AC / 220V AC · manual override.
Every pneumatic actuator we make has a NAMUR interface, so the valve, the actuator and the solenoid can ship as one assembled package. 台灣製造。無最低訂購量。.
產品說明
A NAMUR 電磁閥 — the pilot that turns an electrical signal into actuator movement. It bolts straight onto the NAMUR interface on top of a pneumatic actuator, with no fittings and no tubing between the two.
Two versions, and which one you need depends on your actuator. Get this wrong and the valve will not work. The table below tells you which one to order.
5/2 or 3/2? Match It to Your Actuator
| Your actuator | Order this | 為什麼 |
|---|---|---|
| 雙作用（DA） Air opens it, air closes it |
5/2 通式 | The cylinder has two air ports and both need feeding. A 5/2 valve pressurises one side while venting the other. |
| 彈簧復位 (SR) Air one way, a spring the other |
3/2 way | Only one port takes air. The spring does the return stroke, so the second port is blanked off. |
← 滑動表格以查看所有欄位 →
This is the single most common ordering mistake in pneumatic valve packages. If you are not sure which actuator you have, tell us the model and we will tell you which solenoid it takes.
規格
| 項目 | 規格 |
|---|---|
| 功能 | 5/2 通式 (for double acting) or 3/2 way (for spring return) |
| 安裝 | NAMUR direct mount — bolts onto the actuator, no tubing between them |
| Air connection | G1/4 |
| Working air pressure | 4 – 8 巴 |
| Coil voltage | 24V DC, 110V AC or 220V AC |
| Enclosure rating | IP67 — dust tight, and survives temporary immersion |
| Manual override | Yes — cycle the valve by hand during commissioning or a power cut |
| 原產國 | 台灣製造 |
Will It Fit My Actuator?
If your actuator has a NAMUR 介面 on top — the standard bolt pattern and the two air ports machined into the actuator body — this solenoid bolts straight on. No adapter, no piping.
And if you are buying the actuator from us as well: every pneumatic actuator we make has a NAMUR interface. The solenoid, the actuator and the valve all come from us, assembled and tested together, so there is nothing to match up on site.
IP67 — What It Actually Buys You
IP67 means the coil housing is dust tight, and that it survives temporary immersion in water. In practice: a washdown bay, an outdoor skid in the rain, a plant room that floods an inch deep. It is the rating you want on any solenoid that lives outside a control cabinet.
歸屬之處
- Automated valve packages — the standard pilot on our pneumatic ball and butterfly valves.
- PLC-controlled plant — turns a controller output into actuator movement.
- Retrofit — adds electrical control to any existing NAMUR-interface actuator, including ones you did not buy from us.
- Washdown and outdoor installations — IP67 coil.
向我們購買
- 無最低訂購量。. 先訂購一個來試試看。.
- 製造商，而非貿易公司。. Taiwan, valves since 1999.
- Buy the solenoid alone, or the whole package. Valve + actuator + solenoid, assembled and matched before it ships.
- 報價處理時間：24 小時內。.
Tell us whether your actuator is double acting or spring return, and what coil voltage you run. That is enough for us to quote.
常見問題
我需要的是 5/2 型還是 3/2 型的電磁閥？
雙作用執行器採用 5/2 配置，因為兩個氣口都需要供氣；彈簧復位執行器則採用 3/2 配置，因為只有一個氣口需要供氣，而復位行程由彈簧完成。 這是氣動閥組訂購中最常見的錯誤——如果您不確定自己使用的是哪種執行器，請將型號寄給我們，我們會為您確認。.
這個電磁閥適合我現有的執行器嗎？
如果執行器頂部設有 NAMUR 介面，答案是肯定的——它可以直接用螺栓固定，無需轉接頭，也無需管路。這也包括您並非向我們購買的執行器。.
貴公司的氣動執行器是否符合 NAMUR 標準？
是的。我們生產的每款氣動執行器都配備 NAMUR 介面，因此任何一款電磁閥都能直接安裝在我們的任何一款執行器上。.
它需要多少氣壓？
4 至 8 巴。.
氣路連接尺寸是多少？
G1/4.
貴公司提供哪些線圈電壓？
24V DC, 110V AC and 220V AC.
What does IP67 mean here?
The coil housing is dust tight and survives temporary immersion in water. It is the rating you want for washdown areas, outdoor skids, and anywhere the solenoid is not inside a control cabinet.
Is there a manual override?
Yes. You can cycle the valve by hand during commissioning, testing, or a power cut.
Can I buy the valve, actuator and solenoid as one package?
Yes, and it is how most customers buy it. We assemble and test the three together before shipping, so there is nothing to match up on site.
貴公司是否有最低訂購量？
不。請告訴我們您的需求，我們會為您報價。.
政策樣本
我們很樂意為客戶提供產品樣品，以評估品質或進行測試。此流程通常從根據客戶的規格進行報價開始。.
如果定價可以接受，我們可以免費提供樣品，或者根據產品類型和可用性收取費用。.
運費由客戶承擔。.
訂購流程
在與客戶確認產品需求及其他細節後，我們將發出銷售確認書供客戶審批。一經確認，客戶需支付 30% 訂金以進行生產。.
當量產完成且貨物通過檢驗後，客戶必須先支付 70% 餘額，才能安排出貨。.
相關產品
常見問題
A.如何索取報價？
請提供詳細的詢價單，包括產品規格、材料、數量和任何特殊要求。我們將根據您的要求提供報價。.
B.您的報價條件是什麼？
我們的報價通常基於 FOB 條款. .但是，我們也可以提供 CFR, CIF, 或其他 Incoterms（應要求）。.
C.您的最低訂購量 (MOQ) 是多少？
我們沒有 MOQ。我們以「按單訂製」的方式運作，並接受任何規模的訂單 - 試用訂單可在我們的網站上進行。 歡迎。對於較小的訂單，運費由買方安排和承擔。.
D.您的付款條件是什麼？
電匯 - 訂單確認後支付 30% 定金，出貨前支付 70% 餘款。.
E.您的前置時間是多久？
交貨期取決於訂單數量及規格。當您 索取報價。.
想要瞭解更多？
如果您對我們的任何產品或服務感興趣，只需填寫下列表單。 我們的團隊將盡快與您聯繫，提供您所需的資訊。.