اسم المنتج
صمام كروي عالي الضغط مكون من قطعتين، 2000 WOG – فتحة كاملة، ملولب بنمط PT / NPT
ملخص المنتج
A two-piece high pressure ball valve rated 2000 WOG (2000 psi) — double the standard rating. Cast 316 stainless steel (ASTM A351 CF8M) in stock, CF8 (cast 304) made to order. Full port, PTFE seats, female PT and NPT threads both in stock, sizes 1/4″–2″. A drilled mounting pad on every size means a pneumatic or electric actuator can be added later.
اطلب عرض أسعار — سنرد عليك في غضون 24 ساعة →
ISO 9001 · CE · شركة مصنعة منذ عام 1999
وصف المنتج
The V-2NF is a two-piece high pressure ball valve rated 2000 WOG (2000 psi) — twice the rating of a standard 1000 WOG two-piece valve. The body, cap and ball are cast in ASTM A351 CF8M, the cast form of 316 stainless steel, with a full-port bore that matches the pipe inside diameter so flow is not restricted. A CF8 (cast 304) version is made to order.
Female PT and NPT threads are both in stock, sizes 1/4″ to 2″, and every size carries a drilled mounting pad on the body — so a pneumatic or electric actuator can be fitted directly later without changing the valve. It covers hydraulic circuits and high-pressure water, oil and gas lines where a standard-rated valve would be running at its limit.
1000 WOG or 2000 WOG?
| Standard two-piece (1000 WOG) | V-2NF high pressure (2000 WOG) | |
|---|---|---|
| Rated pressure | 1000 psi water, oil, gas | 2000 psi water, oil, gas |
| Typical duty | General plumbing and process lines | Hydraulic circuits and lines with pressure spikes |
| Where to buy | Two-piece ball valve, 1000 WOG | This page |
المواصفات الفنية الرئيسية
| النوع | High pressure ball valve — two-piece, manual |
| الطراز | V-2NF |
| نطاق الأحجام | 1/4″ – 2″ |
| ضغط التشغيل | 2000 WOG (2000 psi) |
| الميناء | Full port — bore matched to pipe inside diameter |
| الجسم، الغطاء والكرة | ASTM A351 CF8M — the cast form of 316 stainless steel — in stock; CF8 (cast 304) made to order |
| المقعد | PTFE |
| الجذع | SS316 / SS304, matching the body material |
| وصلات الأطراف | Female PT and NPT threads — both in stock |
| المقبض | SS304 lever with locking plate, vinyl grip |
| Actuator mounting | Drilled mounting pad on every size — 10-24 UNC (1/4″–3/4″) or 1/4″-20 UNC (1″–2″) threads |
| وسائل الإعلام | Water, oil, gas, hydraulic fluid |
المواد
Fourteen parts, matching the numbered circles ①–⑭ in the drawing below. Materials shown for the 316 version in stock; the made-to-order 304 version uses CF8 castings.
| لا يوجد | جزء | المواد | الكمية |
|---|---|---|---|
| 1 | الجسم | A351 CF8M (CF8 to order) | 1 |
| 2 | القبعة | A351 CF8M (CF8 to order) | 1 |
| 3 | الكرة | A351 CF8M (CF8 to order) | 1 |
| 4 | المقعد | PTFE | 2 |
| 5 | الجذع | SS316 / SS304 | 1 |
| 6 | حشية | PTFE | 1 |
| 7 | حشية الدفع | PTFE | 1 |
| 8 | Stem packing | PTFE | 1 |
| 9 | الغدة | SS304 | 1 |
| 10 | المقبض | SS304 | 1 |
| 11 | حلقة زنبركية | SS304 | 1 |
| 12 | صامولة المقبض | SS304 | 1 |
| 13 | جراب المقبض | مقبض من الفينيل | 1 |
| 14 | لوحة القفل | SS304 | 1 |
Dimensions (mm) & Cv

Cv is the flow coefficient — how many US gallons per minute pass through the open valve at a 1 psi pressure drop. Full drawing in the V-2NF dimension sheet (PDF).
| الحجم | Bore Ød | L | H | D1 | Pad thread | W2 | A | Cv |
|---|---|---|---|---|---|---|---|---|
| 1/4″ | 11.0 | 59.5 | 53.5 | 103 | 10-24 UNC | 28.5 | 12.5 | 16 |
| 3/8″ | 12.5 | 59.5 | 56.4 | 103 | 10-24 UNC | 28.5 | 12.5 | 16 |
| 1/2″ | 15.0 | 63.5 | 55.0 | 103 | 10-24 UNC | 28.5 | 12.5 | 26 |
| 3/4″ | 20.0 | 76.7 | 66.0 | 103 | 10-24 UNC | 28.5 | 12.5 | 55 |
| 1″ | 25.0 | 90.5 | 71.0 | 127 | 1/4″-20 UNC | 35 | 23 | 110 |
| 1-1/4 بوصة | 32.0 | 98.5 | 89.0 | 127 | 1/4″-20 UNC | 37.5 | 25.4 | 180 |
| 1-1/2 بوصة | 40.0 | 118.0 | 92.0 | 153 | 1/4″-20 UNC | 37.5 | 25.4 | 270 |
| 2″ | 50.8 | 136.0 | 107 | 193 | 1/4″-20 UNC | 38 | 25.4 | — |
المزايا والفوائد
- Double the pressure rating: 2000 WOG covers hydraulic circuits and pressure spikes that push a standard 1000 WOG valve to its limit.
- Full port, published Cv: the bore matches the pipe inside diameter, and the flow coefficient for each size is in the table above — no guessing at pressure drop.
- Actuator-ready: the drilled mounting pad lets you bolt on a pneumatic or electric actuator later — see our air actuated ball valve for the automated option.
- 316 corrosion resistance: CF8M body with added molybdenum resists pitting from chloride-bearing media.
مجالات التطبيق والمواقع
- Hydraulic systems: shut-off duty on hydraulic circuits running at pressures a standard valve cannot hold.
- High-pressure water, oil & gas lines: chemical, oil & gas piping with elevated working pressure.
- معالجة المياه: pump discharge and distribution points where pressure spikes occur.
- Industrial equipment: machine builders who need a compact threaded valve with a 2000 psi margin.
الأسئلة الشائعة
What does 2000 WOG mean? WOG stands for Water, Oil, Gas — the media the rating covers. 2000 WOG means the valve is rated for 2000 psi working pressure at room temperature, twice the 1000 WOG rating of a standard two-piece ball valve.
When do I need 2000 WOG instead of 1000 WOG? When the line pressure or its spikes approach 1000 psi — hydraulic circuits are the typical case. For general plumbing and process lines, our standard two-piece ball valve at 1000 WOG is usually enough.
هل هو منفذ كامل؟ Yes. The bore matches the pipe inside diameter — see the Bore Ød column in the dimensions table — so the open valve adds almost no flow restriction.
ما هي معايير الخيوط المتوفرة؟ Female PT and NPT are both in stock, sizes 1/4″–2″. Tell us which standard your piping uses when you request a quote.
Should I choose 304 or 316 stainless steel? The stock version is cast 316 (CF8M), whose molybdenum resists pitting from chlorides — the safer default for outdoor, coastal and chemical service. A cast 304 (CF8) version is made to order for milder media.
ما هو الحد الأدنى للطلب؟ لا يوجد حد أدنى لكمية الطلب — نحن نقبل الطلبات من أي حجم، بما في ذلك الطلبات التجريبية الصغيرة. بالنسبة للطلبات الصغيرة، يتولى المشتري ترتيب الشحن ودفع تكاليفه. يتم الدفع عن طريق التحويل المصرفي (T/T) — 30% عند تأكيد الطلب، و70% قبل الشحن.
سياسة العينة
يسعدنا تقديم عينات من المنتجات للعملاء لتقييم الجودة أو إجراء الاختبارات. تبدأ العملية عادةً بعرض أسعار بناءً على مواصفات العميل.
إذا كان السعر مقبولاً، يمكننا تقديم عينات إما مجاناً أو بتكلفة حسب نوع المنتج وتوافره.
يتحمل العميل رسوم الشحن.
عملية الطلب
بعد تأكيد متطلبات المنتج والتفاصيل الأخرى مع العميل، سنصدر تأكيد مبيعات للموافقة عليه. وبمجرد التأكيد، يُطلب من العميل دفع عربون 30% للمضي قدماً في الإنتاج.
عند اكتمال الإنتاج الضخم واجتياز البضاعة للفحص، يجب على العميل دفع الرصيد المتبقي 70% قبل ترتيب الشحن.
المنتجات ذات الصلة
-
الصمامات الكروية اليدوية
صمام كروي ملحوم طرفي من قطعتين – فولاذ مقاوم للصدأ 304 / 316، 1000 WOG
-
الصمامات الكروية اليدوية
صمام كروي تصريف من الفولاذ المقاوم للصدأ، بزاوية 90 درجة — 1000 WOG، فتحة كاملة، 316
-
الصمامات الكروية اليدوية
صمام كروي ثلاثي الاتجاهات يدوي – فولاذ مقاوم للصدأ 316، منفذ طويل/قصير، 1000 رطل لكل بوصة مربعة
-
صمامات كروية مكونة من 3 قطع
صمام كروي من الفولاذ المقاوم للصدأ مكون من 3 قطع، 1000 WOG – ملولب وقابل للحام بالمقبس
الأسئلة الشائعة
A. كيف يمكنني طلب عرض أسعار؟
يُرجى تقديم ورقة استفسار مفصلة تتضمن مواصفات المنتج والمواد والكميات وأي متطلبات خاصة. سنقدم عرض أسعار بناءً على طلبك.
B. ما هي شروط الاقتباس الخاصة بك؟
تعتمد عروض أسعارنا عادةً على شروط فوب. ومع ذلك، يمكننا أيضًا تقديم CFR، CIFأو غيرها من شروط التجارة الدولية عند الطلب.
C. ما هو الحد الأدنى لكمية الطلب (موك)؟
ليس لدينا حد أدنى للطلب. نحن نعمل بنظام التصنيع حسب الطلب ونقبل الطلبات مهما كان حجمها — كما نقبل الطلبات التجريبية مرحبًا بكم. بالنسبة للطلبات الصغيرة، يتم ترتيب الشحن ويتحمل المشتري تكاليفه.
D. ما هي شروط الدفع الخاصة بك؟
عن طريق T/T - 30% دفعة أولى عند تأكيد الطلب، و70% الرصيد قبل الشحن.
E. ما هو الوقت المستغرق؟
تعتمد مدة التسليم على كمية الطلب ومواصفاته. وسنقوم بتأكيد الجدول الزمني الدقيق عندما اطلب عرض أسعار.
هل تريد معرفة المزيد؟
إذا كنت مهتماً بأي من منتجاتنا أو خدماتنا، ما عليك سوى ملء النموذج أدناه. سيتواصل معك فريقنا في أقرب وقت ممكن لتقديم المعلومات التي تحتاجها.





