Can you supply a mill certificate?

Yes. A mill certificate for the material is available on request. Please state the requirement when you send your enquiry so it ships with the goods.

Which grade should I order: 202, 304 or 316?

316 for chloride exposure, coastal or marine air, and aggressive media, because the molybdenum in 316 resists chloride pitting. 304 for general industrial water, air and steam lines. 202 for dry indoor structural and low-duty use where corrosion is not a concern.

What thread do these tees use?

PT taper female thread on all three ports. Taper threads seal on the thread flanks, so they hold pressure once torqued with sealant or PTFE tape.

What sizes are available?

1/8" to 4". PT is our stock thread; other threads and reducing tees can be produced to order.

Do you supply OEM and custom fittings?

Yes. We produce to customer drawings and can supply unbranded or customer-branded fittings. Send your drawing or sample and we will reply with a quote within 24 hours.

Stainless steel tee, threaded pipe fitting with PT female threads, equal tee

Product Name

Stainless Steel Tee – Threaded Pipe Fitting (202/304/316), PT Female Thread

Name: Stainless Steel Threaded Tee | Female PT Thread, 304/316 OEM
SKU: TEE-PT

SKU: TEE-PT

SKU TEE-PT Category Stainless Steel Pipe Fittings Brand: YZNG TRONG

Product Summary

A stainless steel equal tee for threaded piping — PT (taper) female thread on all three outlets, 1/8″ to 4″, in 202, 304 or 316. Reducing tees on request. Made in Taiwan by the manufacturer, not a trading company. No MOQ, mill certificate on request, and the elbows, unions, ball valves and strainers for the rest of the line come from the same factory.

Request a Quote — reply within 24 hours →

ISO 9001 · CE · Manufacturer since 1999

Product Description

A stainless steel equal tee for branching or combining flow in threaded piping. PT (taper) female thread on all three outlets, sized 1/8″ to 4″, in 202, 304 or 316 stainless. Reducing tees are quotable on request.

We machine it ourselves in Taiwan. If you also need the elbows, couplings and unions around it — and the ball valves and strainers in the line — they come from the same factory, in the same shipment.

Which Grade Do You Need?

Grade	What it is	Where it belongs
316	Molybdenum added — resists pitting from chlorides	Coastal sites, brine, CIP lines, chemical service
304	The general-purpose stainless	Most industrial water, air and process piping
202	Lower nickel, lower cost	Budget projects in dry, non-corrosive service

← Swipe the table to see all columns →

If the line carries chlorides — seawater, brine, a CIP loop, most chemical service — take 316. The molybdenum is the reason 304 pits and 316 does not. For ordinary industrial water and air, 304 is the standard answer. 202 exists for budget work in dry, non-corrosive service, and we will tell you if it is the wrong call for your line.

Specifications

Item	Specification
Type	Equal tee (reducing tee available on request)
Material	Stainless steel 202, 304 or 316
Thread	PT (taper) female thread on all three outlets — mates with PT / BSPT male pipe ends
Size range	1/8″ – 4″
Common sizes	1/2″, 3/4″, 1″, 2″
Country of origin	Made in Taiwan
Material certificate	Mill certificate supplied on request

Buying From Us

You are probably comparing suppliers right now. Here is what we can tell you straight away, so you do not have to email to find out:

Minimum order quantity: none. We quote what you need, not what a minimum forces you to buy.
Material certificate: a mill certificate is available on request — the steel is traceable to its source.
OEM and custom work: reducing tees, non-standard sizes, customer markings. Send us a drawing.
Quote turnaround: within 24 hours.
Made in Taiwan. We machine these in our own factory, and we have been making stainless steel valves and fittings since 1999.
One supplier for the whole line: tees, elbows, couplings, unions, nipples — and the ball valves and strainers that go between them. One factory, one shipment, one set of documents.

Applications

Water supply and treatment — branching mains, pump stations, filtration skids.
Industrial process piping — air, water, oil and chemical lines from 1/8″ instrument tubing up to 4″ mains.
OEM and equipment builders — fittings supplied to drawing, with the valves that go with them.
Marine and coastal installations — 316 for chloride service.

Related fittings: 90° elbow, 45° elbow, threaded coupling, union, hex nipple, cross. And the valves that go in the line: two-piece ball valve, Y strainer.

FAQ

Do you have a minimum order quantity?

No. We have no MOQ. Tell us the sizes and quantities you need and we will quote them.

Can you supply a material certificate?

Yes. A mill certificate is available on request, so the steel in the fitting is traceable to its source.

Are you a manufacturer or a trading company?

A manufacturer. We machine these fittings in our own factory in Taiwan, and we have been making stainless steel valves and fittings since 1999.

Can you make reducing tees or non-standard sizes?

Yes. Reducing tees are a standard option, and non-standard sizes or customer markings are quotable — send us a drawing.

What thread standard is this?

PT (taper) female thread, which mates with PT / BSPT male pipe ends. Tell us if your piping uses a different standard and we will confirm what we can supply.

Which grade should I choose — 202, 304 or 316?

316 if the line carries chlorides (seawater, brine, CIP, most chemicals). 304 for general industrial water and air. 202 only for budget work in dry, non-corrosive service. Tell us the medium and we will confirm.

Can I order fittings and valves together?

Yes, and it is the reason most of our customers come to us. Tees, elbows, couplings, unions, nipples, ball valves, strainers — one factory, one shipment, one set of documents.

Sample Policy

We are happy to provide product samples for customers to evaluate quality or conduct testing. The process typically begins with a quotation based on the customer’s specifications.

If the pricing is acceptable, we can offer samples either free of charge or at a cost depending on the product type and availability.
Shipping fees are borne by the customer.

Order Process

After confirming the product requirements and other details with the customer, we will issue a Sales Confirmation for approval. Once confirmed, the customer is required to pay a 30% deposit to proceed with production.

When mass production is completed and the goods pass inspection, the customer must pay the remaining 70% balance before shipment is arranged.

FAQ

A. How can I request a quote?

Please provide a detailed inquiry sheet including product specifications, materials, quantities, and any special requirements. We will offer a quotation based on your request.

B. What are your quotation terms?

Our quotations are typically based on FOB terms. However, we can also offer CFR, CIF, or other Incoterms upon request.

C. What is your Minimum Order Quantity (MOQ)?

We have no MOQ. We operate on a made-to-order basis and accept orders of any size — trial orders are welcome. For smaller orders, freight is arranged and borne by the buyer.

D. What are your payment terms?

By T/T – 30% down payment upon order confirmation, and 70% balance before shipment.

E. What is your lead time?

Lead time depends on order quantity and specifications. We will confirm the exact schedule when you request a quote.