{"id":3853,"date":"2025-10-17T09:26:54","date_gmt":"2025-10-17T01:26:54","guid":{"rendered":"https:\/\/ballvalves.tw\/?post_type=product&p=3853"},"modified":"2026-07-16T10:09:40","modified_gmt":"2026-07-16T02:09:40","slug":"elettrovalvola","status":"publish","type":"product","link":"https:\/\/ballvalves.tw\/it\/product\/solenoid-valve\/","title":{"rendered":"Elettrovalvola NAMUR \u2014 a 5\/2 e 3\/2 vie, IP67, 24 V CC\/110 V CA\/220 V CA"},"content":{"rendered":"

Descrizione del prodotto<\/h2>\n

A Elettrovalvola NAMUR<\/strong> \u2014 the pilot that turns an electrical signal into actuator movement. It bolts straight onto the NAMUR interface on top of a pneumatic actuator, with no fittings and no tubing between the two.<\/p>\n

Two versions, and which one you need depends on your actuator<\/strong>. Get this wrong and the valve will not work. The table below tells you which one to order.<\/p>\n

5\/2 or 3\/2? Match It to Your Actuator<\/h2>\n
\n\n\n\n\n\n\n
Your actuator<\/th>\nOrder this<\/th>\nPerch\u00e9<\/th>\n<\/tr>\n<\/thead>\n
Double acting (DA)<\/strong>
\nAir opens it, air closes it<\/td>\n		a 5\/2 vie<\/strong><\/td>\nThe cylinder has two air ports and both need feeding. A 5\/2 valve pressurises one side while venting the other.<\/td>\n<\/tr>\n
Spring return (SR)<\/strong>
\nAir one way, a spring the other<\/td>\n		3\/2 way<\/strong><\/td>\nOnly one port takes air. The spring does the return stroke, so the second port is blanked off.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

\u2190 Scorri la tabella per visualizzare tutte le colonne \u2192<\/p>\n

This is the single most common ordering mistake in pneumatic valve packages. If you are not sure which actuator you have, tell us the model and we will tell you which solenoid it takes.<\/p>\n

Specifiche tecniche<\/h2>\n
\n\n\n\n\n\n\n\n\n\n\n\n\n
Articolo<\/th>\nSpecifiche tecniche<\/th>\n<\/tr>\n<\/thead>\n
Funzione<\/td>\na 5\/2 vie<\/strong> (for double acting) or 3\/2 way<\/strong> (for spring return)<\/td>\n<\/tr>\n
Mounting<\/td>\nNAMUR direct mount<\/strong> \u2014 bolts onto the actuator, no tubing between them<\/td>\n<\/tr>\n
Air connection<\/td>\nG1\/4<\/strong><\/td>\n<\/tr>\n
Working air pressure<\/td>\n4 \u2013 8 bar<\/strong><\/td>\n<\/tr>\n
Coil voltage<\/td>\n24V DC, 110V AC or 220V AC<\/td>\n<\/tr>\n
Enclosure rating<\/td>\nIP67<\/strong> \u2014 dust tight, and survives temporary immersion<\/td>\n<\/tr>\n
Manual override<\/td>\nYes \u2014 cycle the valve by hand during commissioning or a power cut<\/td>\n<\/tr>\n
Paese di origine<\/td>\nProdotto a Taiwan<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Will It Fit My Actuator?<\/h2>\n

If your actuator has a Interfaccia NAMUR<\/strong> on top \u2014 the standard bolt pattern and the two air ports machined into the actuator body \u2014 this solenoid bolts straight on. No adapter, no piping.<\/p>\n

And if you are buying the actuator from us as well: every pneumatic actuator we make has a NAMUR interface.<\/strong> The solenoid, the actuator and the valve all come from us, assembled and tested together, so there is nothing to match up on site.<\/p>\n